UDK 681.828
DEVELOPING AND REFINING THE ALGORITHM OF SINGLE-PLANE DYNAMIC BALANCING OF A HIGH-SPEED FLYING PROTOTYPE
A. V. Klyuchnikov
Russian Federal Nuclear Centre – All-Russia Research Institute of Technical Physics named after academician E. I. Zababakhin P.b. 245, 13, Vassilyeva Str., Snezhinsk, 456770, Russian Federation E-mail: a.klyuchnikov@bk.ru
One of the major tasks that challenges manufacturer at a final assembly stage, aimed to reduce abnormal modes of flying for high-speed models of vehicles, is matching parameters of mass-inertia asymmetry with values, specified in operational documentation for the model. Both characterization and model’s balancing are made with special check-out gauging equipment on final part of the common model’s assemblage. Using of methods and equipment of dynamic balancing permits to increase accuracy of the parameters’ measurements. In the paper the algorithm of balancing analysis is considered, when counterpoising the model within the only correction plane on the vertical balancing stand. And the correction plane is being on considerable distance from model’s center of mass. It enables in a single step either bringing mass-inertia asymmetry parameters to predetermined values or diagnosing impossibility of meeting the above values for every specified model of flying model. The parameters are controlled under dynamic conditions. The flying machine is counterbalanced being a part of assembled rotor. The rotor supports are gas bearings, which has a great staunchness to wear and tear. Vertical position of rotation axis allows to exclude deformations of the body of flying model during the experiment. For measure of nonbalances of the model uses piezo-electric sensors. Processing of measuring signals conducts with use the methods of analogue filtering and digital filtering. Tuning the balancing stand fulfill with use of test weights, which mass are known, and which corner positions in planes of correction are known, too. Using of the algorithm allows to exclude of intermediate steps during the balancing experiment and to cut duration of this process. Verification of calculations, made after the results of balancing experiment, demonstrated high accuracy of obtained formulas and usability of the algorithm for precision balancing the flying models of the only correction plane that locates at a distance well removed from the center-mass of the model.
vector, solid of rotation, symmetry axis, axis of inertia, center of mass, plane of correction, unbalance, balancing analysis.
References
  1. Pravdin V. M., Shanin A. P. Ballistika neupravlyaemikh letatelnikh apparatov [Ballistics of uncontrollable flying machines]. Snezhinsk, RFNC-VNIITF Publ., 1999, 496 p.
  2. Mironov A. D., Vladychin G. P., Kondratov A. A. Metody issledovaniy na letayushchikh modelyakh [Methods of investigations on flying models]. Moscow, Mashinostroenie Publ., 1988, 144 p.
  3. Shchepetilnikov V. A. Osnovy balansirovochnoi tekhniki. Tom 1 [Fundamentals of balancing technique. Vol. 1]. Moscow, Mashinostroenie Publ., 1975, 527 p.
  4. Ilinykh V. V., Klyuchnikov A. V., Mihailov E. F., Timoshchenko A. G. [Technological support of quality during the manufacture of hypersonic uncontrollable flying models]. Vestnik SibGAU. 2013, No. 3 (49), P. 191–196 (In Russ.).
  5. Andreyev S. V., Klyuchnikov A. V., Mihailov E. F. [Prospects of application of dynamic counterbalancing method for testing of flying machine’s mass-inertia asymmetry parameters]. Trudy XVIII Mezhdunarodnoy nauchnoy konferentsii “Reshetnevskie chteniia” [Proc. 18th Int. Technol. Conf. “Reshetnev readings”]. Krasnoyarsk, 2014, Part 1, P. 8–10 (In Russ.).
  6. GOST 22061–76. Mashiny i tekhnologicheskoe oborudovanie. Sistema klassov tochnosti balansirovki [State Standard 22061-76. Machines and equipment. The system of rules of counterbalancing precision]. Moscow, Standartinform Publ., 1977, 139 p. (In Russ.).
  7. Glazyrina L. M., Karpovitskiy M. S., Klyuchnikov A. V., Malgin A. I., Smirnov G. G., Fomin Yu. P. Balansirovochnyi stend s vertikalnoi osyu vrashcheniya [Balancing stand with vertical axis of gyration]. Patent RF, no. 2292533, 2007.
  8. Abyshev N. A., Andreev S. V., Klyuchnikov A. V. [Features of a stand for diagnostics the mass-inertia characteristics of flying machines]. Aviakosmicheskoe priborostroenie. 2015, No. 1, P. 39–45 (In Russ.).
  9. Klyuchnikov A. V. [Test equipment for diagnostics of a mass symmetry distribution of compound rotor’s detailes]. Trudy IX Mezhdunarodnoy nauchno-prakticheskoy konferentsii “Innovatsii na osnove informatsionnykh i kommunikatsionnykh tekhnologiy”. [Proc. 9th Int. Technol. Conf. “Innovations based on information and communication technologies”]. Sochi, 2012, P. 362–364 (In Russ.).
  10. Klyuchnikov A. V., Lysykh A. V., Chertkov M. S. [Metrological aspects of flying machine’s counterbalancing model on dynamic balancing stand]. Vestnik Kontserna PVO “Almaz-Antey”. 2015, No. 1, P. 43–48 (In Russ).
  11. Glazyrina L. M., Karpovitskiy M. S., Klyuchnikov A. V., Malgin A. I., Smirnov G. G., Fomin Yu. P. Sposob balansirovki rotora [Rotor’s counterbalancing method]. Patent RF, no. 2292534, 2007.
  12. Klyuchnikov A. V., Samartsev A. A., Simonova N. F. [Algorithm of functioning of computer program of the stand, which is created for investigations rotor’s mass-inertia asymmetry characteristics]. Trudy Mezhdunarodnogo simpoziuma “Nadyozhnost I kachestvo”. [Proc. 17th Int. Technol. Symp. “Reliability & Quality”]. Penza, 2012, Vol. 1, P. 319–322 (In Russ.).
  13. Andreev S. V., Klyuchnikov A. V., Mikhailov E. F., Lysykh A. V. Peculiarities of measuring signals processing during detail’s dynamic counterbalancing. Proc. 3rd Int. Technol. Conf. “Innovative Information Technologies”. Moscow, 2014, Part 3, P. 238–242.
  14. Andreev S. V., Klyuchnikov A. V., Lysykh A. V., Chertkov M. S. [Automation of measuring parameters, which are showing in asymmetry in flying models’ mass-inertia parameters]. Trudy III Vserossiyskoy nauchno-tekhnicheskoy konferentsii “Rdultovskiye chteniia” [Proc. 3rd Russ. Technol. Conf. “Rdultov readings”]. Sankt-Peterburg, 2013, P. 119–125 (In Russ.).
  15. Klyuchnikov A. V. [Turning of a balancing stand: To the question about raising of precision during body’s mass-inertia parameters measuring]. Trudy III Vserossiyskoy nauchno-prakticheskoy konferentsii “Informatsionno-izmeritelnaya tekhnika i tekhnologii [Proc. 3rd Russ. Technol. Conf. “Information and Measuring Technique and Technologies”]. Tomsk, 2012, P. 52–55 (In Russ.).
  16. Klyuchnikov A. V. Sposob balansirovki rotora v odnoy ploskosti korrektsii [Method of rotor’s counterbalancing in singular place for correction]. Patent RF, no. 2499985, 2007.

Klyuchnikov Aleksandr Vassilyevich – Cand. Sc., head of the designer’s department of Federal State Unitary Enterprise “RFNC-VNIITF named after academician E. I. Zababakhin”. E-mail: a.klyuchnikov@bk.ru