UDK 621.791.75
MANUFACTURING TECHNOLOGY AND WELDING OF ALUMINUM ALLOYS ELECTRODES CONTAINING NANOPOWDERS
G. G. Krushenko
Institute Computational Modeling SB RAS 50, Akademgorodok, Krasnoyarsk, 660036, Russian Federation E-mail: genry@icm.krasn.ru. Spin-code 2974-6220
In the manufacture of aircraft structures made of aluminum alloys used is the welding, physical essence of which is to obtain a permanent connection by melting and co-crystallization of the welding electrode materials and parts to be joined. However, while the structure of the weld and the joined parts of the influence of heat coarsen, which leads to a reduction in the mechanical properties of the welded articles. It is known that metal with fine-grained structure has higher mechanical properties compared to coarse. Thus in practice, for the purpose of foundry castings structure re-finement modification is used, the essence of which consists in introducing alloys into the liquid metal using substances which serve as crystallization centers. However, the possibility of modifying such agents has reached the limits in re-cent years and a new method of modifying the application using nanopowders (NP) chemical compounds (nitrides, car-bides, borides, oxides), which gives a high effect of enhancing the mechanical properties of the molded articles has been found. It should be beared in mind that the mechanism of crystallization of molded articles and weld identical technology modifying liquid alloy was used to grind the weld structure in the manufacture of a welded structure of the aircraft from the example sheets of aluminum-magnesium alloy AMg6 with welding rods containing NP. The test results are cut from the welded structure samples showed that  metal at the weld joint during the welding rod comprising NP BN, is 333 MPa, LaB6  338 MPa, TiCN  345 MPa. These values were higher than 4.1, respectively; 5.6 and 7.8 %, than the samples have AMg6 alloy (320 MPa), welded by the standard electrode of the same alloy. The development is protected by patents of the Russian Federation.
Keywords: aircraft, aluminum alloys, welding.
References

References

 

1.  Alekseev V. V., Ovchinnikov V. V., Grushko O. E. et al. Sposob dugovoy svarki v inertnykh gazakh stykovykh soedineniy raznorodnykh alyuminievykh splavov [Method of arc welding in inert gases butt joints of dissimilar aluminum alloys]. Patent RF, no. 2357841, 2009.

2.  Hartman D. A., Davé V. R., Cola M. J. In-process quality assurance for aerospace welding. Welding Journal. 2009, Vol. 88, No. 1, P. 28–31.

3.  Parshin S. G. Elektrodugovaya svarka s primeneniem aktiviruyushchikh flyusov [Arc welding using activating fluxes]. Samara, Samarskiy nauchnyy tsentr RAN Publ., 2006, 380 p.

4.  Hall E. O. The deformation and Ageing of Mild Steel: III. Discussion of Results. Proceeding of the Physical Society. Section B. 1951, Vol. 64, No. 9, P. 717–753.

5.  Petch N. J. The Cleavage Strength of Polycrystals. Journal of Iron and Steel Institute. 1953, Vol. 174, P. 25–28.

6.  Modifitsirovanie siluminov. [Inoculation of the materials silumina]. Kiev, AN USSR Publ., 1970, 179 p.

7.  Bondarev B. I., Napalkov V. I., Tararyshkin V. I. Modifitsirovanie alyuminievykh deformiruemykh splavov. [Inoculation of wrought aluminium alloys]. Moscow, Metallurgiya Publ., 1979, 224 p.

8.  Lepinskih B. M., Telicyn I. I. Fiziko-khimicheskie zakonomernosti modifitsirovaniya zhelezo-uglerodistykh rasplavov. [Physico-chemical principles of inoculation of iron-carbon melts]. Moscow, Nauka Publ., 1986, 96 p.

9.  Krushenko G. G., Fil’kov M. N., Balashov B. A. et al. [Refinement of the structure of the alloy D16 when modifying the bars with ultra-fine powders]. Tsvetnaya metallurgiya. 1991, No. 4, P. 8–10 (In Russ.).

10. Krushenko G. G., Balashov B. A., Vasilenko Z. A. et al. [Improvement of mechanical properties of aluminum casting alloys with ultrafine powders]. Liteynoe proizvodstvo. 1991, No. 4, P. 17–18 (In Russ.).

11. Saburov V. P., Cherepanov A. N., Krushenko G. G. et al. Plazmokhimicheskiy sintez ul'tradispersnykh poroshkov i ikh primenenie dlya modifitsirovaniya metallov i splavov. [Plasmachemical synthesis of ultradispersed powders and their application for modification of metals and alloys]. Novosibirsk, Nauka, Sibirskaya izdatel'skaya firma RAN Publ., 1995, 344 p.

12. Krushenko G. G. [Nanopowders of chemical compounds is a means of improving the quality of the metal and structural strength]. Zavodskaya laboratoriya. 1999, Vol. 65, No. 11, P. 42–50 (In Russ.).

13. Zhukov M. F., Cherskiy I. N., Krushenko G. G. et al. Uprochnenie metallicheskikh, polimernykh i elastomernykh materialov ul'tradispersnymi poroshkami plazmokhimicheskogo sinteza. [Hardening of metallic, polymeric and elastomeric materials ultrafine powders plasmachemical synthesis]. Novosibirsk, Nauka, Sibirskaya izdatel'skaya firma RAN Publ., 1999, 312 p.

14. Moskvichev V. V., Krushenko G. G., Burov A. E. et al. Nanoporoshkovye tekhnologii v mashinostroenii. [Nanopowder technology in mechanical engineering]. Krasnoyarsk, Sibirskiy federal’nyy universitet, 2013, 186 p.

15. Krushenko G. G., Musohranov Ju. M., Jamskih I. S. et al. Sposob modifitsirovaniya liteynykh alyuminievykh splavov evtekticheskogo tipa [The method of inoculation of cast aluminum alloys of eutectic type]. Patent RF, no. 831840, 1981.

16. Krushenko G. G., Fil’kov M. N. Sposob polucheniya modifikatora dlya doevtekticheskikh alyuminievo-kremnievykh splavov [The way to obtain a modifier for hypoeutectic aluminum-silicon alloys]. Patent RF, no. 2475334, 2013.

17. Morohov I. D., Trusov L. I., Chizhik S. P. Ul’tradispersnye metallicheskie sredy [Ultrafine metal environment]. Moscow, Atomizdat Publ., 1977, 264 p.

18. Krushenko G. G. Sposob modifitsirovaniya alyuminievo-kremnievykh splavov. [The method of inoculation of aluminum-silicon alloys]. Patent RF, no. 2475550, 2013.

19. Krushenko G. G., Fil'kov M. N. [Inoculation of aluminium alloys by nanopowders]. Nanotehnika. 2007, No. 4, P. 58–64 (In Russ.).

20. Cherepanov A. N., Borisov V. T. [The theory of heterogeneous nucleation on ultrafine spherical particles]. DAN. 1996, Vol. 351, No. 6, P. 783–785 (In Russ.).

21. Sedel'nikov V. V. [The formation of the crystallizing systems by modifying their ultrafine powders]. Liteynoe proizvodstvo. 2005, No. 1, P. 2–5 (In Russ.).

22. Einstein A. Uber die von der molekularkinetischen Theorie der Warme geforderte Bewegung
von in ruhenden Fluessigkeiten suspendierten Teilchen. Annalen der Physik. Mai 1905. B 17. P. 549–560.

23. Krushenko G. G., Balashov B. A. [Hardening of TiAl3 particles in aluminum composite material]. Liteynoe proizvodstvo. 1995, No. 10, P. 16–17 (In Russ.).

24. Dankov P. D. [Crystal-chemical mechanism of interaction between the crystal surface with alien elementary particles]. ZhFH. 1946, Vol. 20, No. 8, P. 853–867 (In Russ.).

25. Bliznakov G. M. [Adsorption of impurities and the mechanism of crystal growth]. Kristallografiya. 1959, Vol. 4, No. 2, P. 150–156 (In Russ.).

26. Portnov V. N. Vliyanie primesey na skorost’ rosta graney kristallov iz rastvora. [The effect of impurities on the growth rate of the faces of the crystals from the solution]. Nizhniy Novgorod, Izdatel’stvo Nizhegorodskogo gosuniversiteta Publ., 2013, 166 p.

27. Narai-Sabo I. Neorganicheskaya kristallokhimiya [Inorganic chemistry]. Budapesht, Izdatel'stvo AN Vengrii Publ., 1969, 504 p.

28. Krushenko G. G. Sposob izgotovleniya elektrodnoy provoloki dlya svarki alyuminievykh splavov [A method of manufacturing an electrode wire for welding of aluminium alloys]. Patent RF, no. 2429958, 2011.

29. Brodovich N. V., Obuhov A. V. Sposob izgotovleniya puchkovykh elektrodov [A method of manufacturing a beam-type electrodes]. Patent RF, no. 87411, 1949.

30. Ishak M., Maekawa K., Yamasaki K. The characteristic of laser welded magnesium alloy using silver nanoparticles as insert material. Materials Science and Engineering: A. 2012. Vol. 536. P. 143–151.

31. Vozdeystvie vysokokontsentrirovannykh potokov energii na materialy s tsel'yu izmeneniya ikh fiziko-khimicheskikh svoystv i uluchsheniya ekspluatatsionnykh kharakteristik. Sibirskoe otdelenie RAN v 2007 godu. [The impact of highly concentrated streams of energy to materials to change their physical-chemical properties and improved performance. Siberian branch of the Russian Academy of Sciences in 2007]. Novosibirsk, Izdatel'stvo SO RAN Publ., P. 138–139.

32. Balashov B. A., Krushenko G. G., Lepihin A. M. [The use of modifying rod Al-Ti-Be in the welding of aluminum and aluminum alloys] Sovremennye problemy svarochnoy nauki i tekhniki: Materialy Rossiyskoy nauchno-tekhnich. konf. Ch. I. [Modern problems of welding science and technology: Proceedings of the Russian scientific and tech. Conf. Part I]. Perm’, TPI, 1995, P. 197–198.

33.          Krushenko G. G., Fil'kov M. N. [Technology for producing aluminum composite material with a high content of reinforcing powders]. Vestnik SibGAU. 2011, No. 1(34), P. 139–142 (In Russ.).


Krushenko Genry Gavrilovich – Dr. Sc., professor, Chief research officer, Institute of Computational Modeling, SB RAS. E-mail: genry@icm.krasn.ru.