Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 62-762.4, 62-762.8, 678
INFLUENCE OF DISTRIBUTION OF CONTACT PRESSURE ON LEAKAGE THROUGH CASKET
A. А. Аsheichik*, V. L. Polonsky
Peter the Great St.-Petersburg Рolytechnical University 29, Polytechnicheskaya St., St.-Petersburg, 195251, Russian Federation *E-mail: aseichik52@mail.ru
The questions of influence of the shape of contact surfaces on leakages through rubber seals in fixed connection of subassemblies of space technics are considered in the article. It is known from practice of operation of seals of various designs of space-rocket hardware that the shape of contact surfaces and consequently also the shape of diagram of stresses in a contact zone considerably influences the leaks value The design of test equipment and technique of leaks study through fixed face seal is offered. Object of research is the fixed face ring seal. During the tests into a ring rubber seal the ring indentors of various shape were pressed. The depth of introduction was regulated and measured with split-hair accuracy. Thus various variants of distribution of contact stresses on width of a contact area were modelled. The air was delivered under different pressure through a gas re-ducer in an internal cavity of seal and measurement of leaks was made Experimental dependences of leaks value vs external pressure at various values of introduction of the peak into rubber are received. The developed finite-element models of three seals used in experiment with various shapes of indentors and program STAR has allowed to theoretically study distribution of stresses on width of a contact area. The result of this experimen-tally-theoretical work was creation of the new finite-element program for calculation of leaks through fixed rubber seals LEAKAGES considering the shape of rubber seals viscoelastic properties of rubber including the relaxation and creep phenomenon. As a result of experimental researches on introduction ring indentors of different profiles into a rubber fixed gasket it was found that at the expense of shape optimization of indentor the leaks value can be lowered 10 times. The finite-element program for calculation of leaks which allows optimizing the shape of created rubber seals for the aerospace equipments is developed.
Keywords: leakages, face seal, rubber, contact stresses, indentor, finite element analysis, prediction.
References

References

 

1.   Kirillov N. P., Burenin V. V., Polyanskiy V. I., Dragun D. K. [The designs of face seals for torsion shaft of centrifugal pumps of systems of refuelling of rockets]. Vestnik MADI. 2012, No. 1, P. 18–12 (In Russ.).

2.   Golubev A. I., Kondakov L. A. Uplotneniya i uplotnitel'naya tekhnika: Spravochnik. [Seal and seal equipment: Handbook]. Moscow, Mashinostroenie Publ, 1986, 464 p.

3.   Lazarev S. O, Asheichik A. A., Polonskii V. L. [Research of influence of stress distribution in a contact zone on leaks through rubber seal in fixed connection]. Materialy X Vserossiiskoi konferentsii po problemam nauki i vysshei shkoly. [Proceedings of X All-Russian Conference on Science and Higher Education]. St.-Petersburg. St.-Petersburg polytechnical university Publ., 2006, P. 311–312 (In Russ.).

4.   Asheichik A. A., Chulkin S. G. Eksperimental'naya mekhanika. [The experimental mechanics].
St.-Petersburg, St.-Petersburg polytechnical university Publ., 2008, 107 p.

5.   Asheichik A. A., Polonskii V. L., Chulkin S. G. Vychislitel'naya mekhanika. Raschet detalei mashin metodom konechnykh elementov. [The computing mechanics. Calculation of machine elements by a finite elements method]. St.-Petersburg. St.-Petersburg polytechnical university Publ., 2011, 301 p. (In Russ,).

6.   Asheichik A. A. Detali mashin i osnovy konstruirovaniya. Spravochnye materialy [The machine
elements and base of design: background materials]. St.-Petersburg. St.-Petersburg polytechnical university Publ., 2014, 111 p. (In Russ.).

7.   Asheichik A. A., Polonskii V. L. [The prediction of change of physic-mechanical properties of elastomers at thermal ageing]. Sovremennoe mashinostroenie. Nauka i obrazovanie: materialy mezhdunar. nauchn.- prakt. konferentsii. [Modern mechanical engineering. Science and education: materials of the international scientifically-practical conference]. St.-Petersburg, St.-Petersburg polytechnical university Publ., 2013, P. 265–272 (In Russ.).

8.   Asheichik A. A., Polonskii V. L. [The definition
of energy of activation of elastomers an experimentally-theoretical method]. Sovremennoe mashinostroenie. Nauka i obrazovanie: materialy mezhdunar. nauchn.- prakt. konferentsii. [Modern mechanical engineering. Science and education: materials of the international scientifically-practical conference]. St.-Petersburg, St.-Petersburg polytechnical university Publ., 2014, P. 283–291 (In Russ.).

9.   Obraztsov I. F., Savel’ev L. M. Khazanov Kh. S. Metod konechnykh elementov v zadachakh stroitel’noy mekhaniki letatel'nykh apparatov [The finite element analysis in problems of building mechanics of flying machines]. Moscow, Vysshaya shkola Publ., 1985, 392 p. (In Russ.).

10.   Chulkin S. G., Asheichik A. A., Selin S. N. [Application of carbon fibre bearings in shipbuilding, turbine building, the mining equipment].  Sovremennoe mashinostroenie. Nauka i obrazovanie: materialy mezhdunar. nauchn.-prakt. konferentsii. [Modern mechanical engineering. Science and education: materials of the international scientifically-practical conference]. St.-Petersburg, St.-Petersburg polytechnical university Publ., 2012, P. 805–816 (In Russ.).

11.  Asheichik A. A., Chuvakova M. K. [Research of the dynamic module and the module of an internal friction of elastomers]. XLIII Nedelya nauki SPbPU: materialy mezhdunarodnoi konferentsii 1–5 dekabrya 2014. [XLIII Science week of SPbPU: materials of international conference 2–7 December 2013 year]. St.-Petersburg. St.-Petersburg polytechnical university Publ., 2015, P. 70–73 (In Russ.).

12.   Bartenev G. M. Struktura i relaksatsionnye svoistva elastomerov. [Structure and relax properties
of elastomers]. Moscow, Khimiya Publ., 1979, 287 p. (In Russ.).

13.   Asheichik A. A., Polonskii V. L. Eksperimental'noe issledovanie elastomerov i polimerov dlya
neftyanoi promyshlennosti. [Experimental research of elastomers and polymers for petroleum industry].
St.-Petersburg. St.-Petersburg polytechnical university Publ., 2015, 236 p. (In Russ.).

14.   Lazarev S. O., Polonskii V. L., Asheichik A. A. Vychislitel'naya mekhanika. Ch. 2 [The computing mechanics. Part 2]. St.-Petersburg. St.-Petersburg polytechnical university Publ., 2007, 122 p. (In Russ.).

15.       Pidaparti R. M., Jayanti S., Henkle J., El-Mounayri H. Design simulation of twisted cord-rubber structure using proe/ANSYS. Composite Structures, 2001, Vol. 52, No. 3–4, P. 287–294


Asheichik Anatoliy Anatol'evich – Cand. Sc., Docent, St. Petersburg Polytechnical University Peter the Great. e-mail: aseichik52@mail.ru.

Polonsky Vladimir L'vovich – Cand. Sc., Docent, St. Petersburg Polytechnical University Peter the Great. e-mail: Vladimir.polonsky@gmail.com.