UDK 621.793
DESIGN IMPROVEMENTS FOR SPRAYING DEVICE-GUN EM-17
A. E. Miheev*, S. S. Ivasev, A. V. Girn, M. N. Draganyuk, T. V. Trushkina
Reshetnev Siberian State Aerospace University 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation *Е-mail: michla@mail.ru
In this case study an improved design of the spray-gun electric arc metallizer has been analyzed. To analyze the factors affecting the process of spraying a computer simulation with SolidWorks Flow Simulation to analyze gas-dynamic of spraying process of the electric arc metallizer EM-17 has been conducted. After analysis of identified weaknesses for industrial electrometallization device (large spray angle, low speed and flow instabilities) several construction design changes were offered. We proposed an upgrade design of spray device which is used as a nozzle with a cocurrent, compressing the main stream of the air stream. To confirm the theoretical research an experimental model of a spray device with improved design was made. During the tests it has been found that the spray angle dropped from 45°–60° to 15°–20°, efflux was more stable and uniform. Comparative analysis of the performance of the deposition showed that when using the advanced-gun, it increased by an average of 25 %. Comparative experimental study on deposition of different materials has been conducted. Metallographic studies sprayed samples showed that the coatings provide improved metallizer are more uniform and have less porosity. The microhardness of the coating has a higher value. Increased strength of adhesion of the coating to the substrate is 30 %, and corrosion resistance increased by 15 %. Decreased porosity of the coating is 20–30 %. The utilization of materials increased from 0.6 to 0.85.
Keywords: arc spraying nozzle, coating adhesion, gas-dynamic analysis.
References

References

 

1.  Khasuy A., Morigaki O. Naplavka i napylenie [Surfacing and spraying]. Moscow, Mashinostroenie Publ., 1985, P. 136–147.

2.  Baldaev L. Kh. Gazotermicheskoe napylenie [Gas thermal spraying]. Moscow, Market DS Publ., 2007, 105 p.

3.  Borisov Yu. S., Kharlamov Yu. A., Sidorenko S. L. Gazotermicheskie pokrytiya iz poroshkovykh materialov [Thermal coatings from powder materials]. Kiev, Naukova dumka Publ., 1987, 120 p.

4.  Kudinov V. V., Bobrov G. V. Nanesenie pokrytiy napyleniem. Teoriya, tekhnologiya i oborudovanie [The spray coating. The theory, technology and equipment]. Moscow, Metallurgiya Publ., 1992, P. 61–64.

5.  Kudinov V. V., Ivanov V. M. Nanesenie plazmoy tugoplavkikh pokrytiy [Application of plasma refractory coatings]. Moscow, Mashinostroenie Publ., 1981, 212 p.

6.  Sidorov A. I. Vosstanovlenie detaley mashin napyleniem i naplavkoy [Restoring spraying of machine parts and surfacing]. Moscow, Mashinostroenie Publ., 1987, P. 53–55.

7.  Sinani I. L., Fedoseeva E. M., Beresnev G. A. Metody naneseniya pokrytiy [Coating method]. Perm’, Izd-vo Perm. gos. tekhn. un-ta Publ., 2008, P. 60–71.

8.  Tushinskiy L. I., Plokhov A. V. Issledovanie struktury i fiziko-mekhanicheskikh svoystv pokrytiy [Investigation of the structure and physicomechanical properties of the coatings]. Novosibirsk, Nauka Publ., 1986, 105 p.

9.  Kofanova N. K. Korroziya i zashchita metallov [Corrosion and protection of metals]. Alchevsk, 2003, 181 p.

10. Zenin B. S., Slosman A. I. Sovremennye tekhnologii poverkhnostnogo uprochneniya i naneseniya pokrytiy [Modern technologies of surface hardening and coating]. Tomsk, Izd-vo Tomskogo politekhnicheskogo universiteta Publ., 2012, 120 p.

11. Rogov V. A., Ushomirskaya L. A., Chudakov A. D. Osnovy vysokikh tekhnologiy [High-tech]: ucheb.posobie, Moscow, Vuzovskaya kniga Publ., 2001, 256 p.

12. Korobov Yu. S., Boronenkov V. N., Baranovskiy V. E. Raspylitel’naya golovka elektrodugovogo metallizatora [The spray head of the arc-gun]. Patent RF, no. 2047395, 1995.

13. Okladnikov S. I., Salokhin A. V. Raspylitel’naya golovka elektrodugovogo metallizatora [Arc-gun spray head]. Patent RF, no. 2191637, 2002.

14. Solov’ev R. Yu., Litovchenko I. N. , Petryakov B. I., Vorob’ev P. A., Yusim M. Yu. Pribor dlya izmereniya davleniya geterofaznogo potoka [Instruments for measuring pressure heterophasic stream]. Patent RF, no. 2385452, 2010.

15. Gusev V. M., Gusev M. V., Isakaev M. K., Mordynskiy V. B., Marichev A. V Sposob elektrodugovoy metallizatsii [Arc spraying method]. Patent RF, no. 2386720, 2010.

16. Okladnikov S. I., Salokhin A. V. Elektrodugovoy metallizator [Arc metallizer]. Patent RF, no. 2191075, 2002.

17. Berezovskiy F. M., Kondratov S. I. Ustroystvo elektrodugovogo vysokoskorostnogo provolochnogo napyleniya [The device of a high-speed wire arc spraying]. Patent RF, no. 2094523, 1997.


Miheev Anatolii Egorovich – Dr. Sc., professor, head of Flying vehicles department, Reshetnev Siberian State Aerospace University. E-mail: michla@mail.ru.

Ivasev Sergei Sergeevich – Cand. Sc., Docent, Docent of Quality management and certification department, Reshetnev Siberian State Aerospace University.

Girn Aleksei Vasilyevich – Cand. Sc., Docent, Docent of Flying vehicles department, Reshetnev Siberian State Aerospace University. E-mail: girn007@gmail.com.

Draganyuk Oksana Nikolaevna – student, Reshetnev Siberian State Aerospace University. E-mail: don-oks@mail.ru.

Trushkina Tatiana Vladimirovna – assistant of Flying vehicles department, Reshetnev Siberian State Aerospace University. E-mail: Tatyana.si@mail.ru.