Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 678-465
DETERMINATION OF THE COMPLEX INDEX FOR REFLECTOR QUALITY LEVEL ASSESSMENT
O. A. Kupriyanova*, A. Yu. Vlasov, K. A. Pasechnik, A. M. Arzamaskina
Reshetnev Siberian State Aerospace University 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation *E-mail: kupriyanova1809@gmail.com
The paper proposes an antenna reflector’s quality assurance method for space communication systems. It requires meeting a specified condition for the method’s application, which includes matching the tolerance by the standard deviation of reflector surface geometry and reflection coefficient values. After meeting the condition control of other reflector parameters from listed quality indices nomenclature can be permitted. The nomenclature is based on require-ments of standard and technical product documentation and including device working ability’s base characteristics. The method consists of complex quality index calculation. Complex quality index can be calculated by using differ-ential method, comprising in a comparison between real and standard (ideal) values of reflector parameters from the listed nomenclature. The actual data for the calculation are collected during quality control and testing. The summary formula of the complex quality index is introduced for the purposes of determining the product quality level value for impersonal technological process evaluation. For comparative assessment of complex quality index within a single production lot, this paper proposes rating scale categories based on ABC analysis and Pareto principles and includes three categories. This index is a quantitative estimate of reflector quality and can be used for further analysis purposes and managing of production manufacture’s technological process. In addition to the method implementation example of the calculation algorithm for space receiver system reflector from polymer composite material of Ku-frequency is demonstrated. The developed method application is a crucial pre-condition for quality assessment level of reflector, technology improvement and for defective products prevention.
Keywords: control, quality management, reflector, assessment method.
References

References

 

1.  Vlasov A. Yu., Pasechnik K. A., Martynov V. A. [Determination of the range of changes in key parameters, ensuring stability production process of complex shapes of polymer composites by method RTM]. Vestnik SibGAU. 2014, No. 4 (56), P. 202–208 (In Russ.).

2.  Kupriyanova O. A., Serzhantova M. V., Banschikova M. N. [Quality Control Parameters of Manufacturing Composite Antenna Reflector]. Journal of Siberian Federal University. Engineering & Technologies. 2015, No. 8 (In Russ.). P. 324–330.

3.  Lopatin A. V., Pasechnik K. A., Vlasov A. Yu., Shatov A. V. [Development of composite precision satellite reflector: Finite element construction modeling]. Vestnik SibGAU. 2013, No. 3(49), P. 73–78 (In Russ.).

4.  Vlasov A. Yu., Filenkova N. V., Kravchuk D. E. [Development of the precision satellite reflectors of polymeric composite materials: Adaptive control system of manufacturing process]. Vestnik SibGAU. 2013, No. 3(49), P. 166–168 (In Russ.).

5.  GOST 15467–79. Upravlenie kachestvom produktsii. Osnovnye ponyatiya. Terminy i opredeleniya [Standard 15467–79. Product-quality control. Basic concepts. Terms and definitions]. Moscow, 1979. 22 p.

6.  Gajdachuk V. E., Kovalenko V. A., Omelchenko E. V. [The analysis of the technological defects arising in a series production of integrated airframes made from polymeric composite materials]. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya. 2010, No 3(70), P. 11–20 (In Russ.).

7.  Murashov V. V., Rumyantsev A. F. [Defects in solid parts and multilayered structures made of polymer composite materials and methods for their detection. Part 1. Defects in solid parts and multilayered structures made of polymeric composite materials]. Kontrol’. Diagnostika. 2007, No. 4, 18 p. (In Russ.).

8.  Murashov V. V., Rumyantsev A. F. [Defects in solid parts and multilayered structures made of polymer composite materials and methods for their detection. Part 2. Methods for defects detection in solid parts and multilayered structures made of polymer composite materials]. Kontrol’. Diagnostika. 2007, No. 5, 19 p. (In Russ.).

9.  Shershak P. V. [Features for ensuring control of special technological processes of polymeric composite materials products manufacturing] Sbornik dokladov Vserossiyskoy nauchno-tekhnicheskoy konferentsii “Metrologicheskoe obespecheniya ispytaniy i izmereniy v aviatsionno-kosmicheskoy promyshlennosti” [Metrological support of testing and measurements in aerospace industry]. Moscow, 2013, 6 P.

10.   Hartmann J., Habersack J., Steiner H. J. Analysis and Measurement of Reflector Antennas in the MM-Wave Frequency Range. INICA ’07 2nd International ITG Conference Antennas, 2007, P. 41–44. Doi: 10.1109/INICA.2007.4353928.

11.   Kovalenko V. A. [Analysis of mechanical defects and variations in the proportions and properties of polymer composites]. Voprosy proektirovaniya i proizvodstva konstruktsiy letatel’nykh apparatov. 2012, No, 4, P. 57–64 (In Russ.).

12.   Gaydachuk V. E., Kovalenko V. A. [Levels of structural defects that arise during manufacturing products made of polymeric composite materials]. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya. 2012, No. 6, P. 5–12 (In Russ.).

13.   Kovalenko V. A. [Indicators of quality throughout the lifecycle of structures rocket and space technology polymer composite materials]. Otkrytye informatsionnye i komp’yuternye integrirovannye tekhnologii. 2011, No. 50, P. 128–140 (In Russ.).

14.   Kovalenko V. A. [Researching of defects resulting in production aggregates of rocket and space technology made of polymeric composite materials. Report 1. Tolerance of molded products thickness from project value]. Aviatsionno-kosmicheskaya tekhnika i tekhnolo-
giya. 2012, No 3(90), P. 10–21 (In Russ.).

15.   Gorobets N. N., Kiyko, V. I., Gorobets V. N. Dependence of the lateral and cross-polarized radiation reflector antennas on their size and focal length. Antenna Theory and Techniques (ICATT), 2013 IX International Conference, 2013, P. 434–437. Doi: 10.1109/ICATT. 2013.6650803.

16.   GOST R 54072-2010. Izdeliya kosmicheskoy tekhniki. Materialy kompozitsionnye polimernye. Nomenklatura pokazateley [State Standard R 54072–2010. Space technology products. Polymer composites. List of indices]. Moscow, Standartinform Publ., 2011, 11 p.

17.   Radkevich Ya. M., Radkevich D. Ya. [Mining equipment and manufacturing processes quality. Quality assessment of manufacturing parts]. Gornyy informatsionno-analiticheskiy byulleten’. 1999, No. 8, P. 144–145 (In Russ.).

18.   Il’enkova S. D. Mikroekonomicheskaya statistika [The microeconomic statistics]. Moscow, Finance and Statistics Publ., 2004, 544 p.

19.   Chernavskiy D. S., Nikitin A. P., Chernavs-
kaya O. D. [On emergence of Pareto distribution in complex dynamical systems]. Biophysics. 2008, No. 2(53), P. 351–358 (In Russ.).


Kupriyanova Olesya Andreevna – engineer, Reshetnev Siberian State Aerospace University. E-mail: kupriyanova1809@gmail.com.

Vlasov Anton Yur’evich – Cand. Sc., Docent, Reshetnev Siberian State Aerospace University. E-mail: vlasov.anton@gmail.com.

Pasechnik Kirill Arnol'dovich – engineer, Reshetnev Siberian State Aerospace University. E-mail: kir.nik@mail.ru.

Arzamaskina Anastasiya Mikhaylovna – engineer, Reshetnev Siberian State Aerospace University. E-mail: stmadden@rambler.ru.