Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 678
DEVELOPMENT OF THE TECHNOLOGY OF PARTIAL SOLIDIFICATION OF THIN-WALLED SHELLS WHEN CREATING DESIGNS FROM POLYMERIC COMPOSITE MATERIALS
A. Yu. Vlasov*, K. A. Pasechnik, V. A. Martynov
Reshetnev Siberian State Aerospace University 433/1, Semafornaya Str., Krasnoyarsk, 660059, Russian Federation, *E-mail: vlasov.anton@gmail.com
The article focuses on the creation of dimensionally stable integrated thin-walled structures made of polymer com-posite materials by the binder partially cross-linking. The relevance of the work lies in the increased requirements for aerospace structures: an increase in structural strength and reduce its weight. A partial cross-linking method allows you to create integrated design with a low weight due to lack of mechanical fasteners. The partial cross-linking method allows you to create integrated design with high strength, stiffness and dimensional stability due to lack of additional materials besides matrix and reinforcement. It allows to get the principle of continuity of the final material. The addi-tional advantage of the partial cross-linking method is molding structure in one process cycle. This article describes the current state of the partial cross-linking manufacturing technology and research results identified previous work. We analyzed the curing step of the hot temperature polymer binder and determined optimal parameters of cure for solve the problem about maximum adhesion between two part of integrated structure and minimal cycle time for organ-ize of serial production. In this article we have shown a mold construction for production composite material by RTM with the partial cross-linking method and heat exchanger construction to heat extraction from partial cross-linking area. We conducted a thermal design for different heat exchanger construction and we chose the best construction for this case. We produced the mold for resin transfer molding and we get a sample of material with partial cross-linked area.
Keywords: integrated design, polymer composites, partial cross-linking.
References

References

 

  1. Moosburger-Will J. Influence of partial cross-linking degree on basic physical properties of RTM6 epoxy resin. Journal of Applied Polymer Science, 2013, Vol.130, P. 4338–4346.
  2. Pocius A. Klei, adgezivy, tekhnologiya skleivaniya [Adhesion and adhesives technology]. Saint Petersburg, Professiya, 2007, 373 p.
  3. Lopatin A. V. [Development of composite precision satellite reflector: finite element construction modeling]. Vestnik SibGAU. 2013, No. 3(49), P. 73–78 (In Russ.).
  4. Vlasov A. Yu. [et al.]. [Investigation of the curing process of the polymeric binder based on their dielectric parameters when creating a dimensionally stable thin-walled structures resistance to the negative space factors]. Vestnik SibGAU. 2014, Vol. 4(56), P. 197–201 (In Russ.).
  5. Horn Siegfried. Method for manufacturing fiber composite component, particularly structural component for vehicle, involves providing primary structure by partial curing of fiber material infiltered with matrix material. Patent DE, No. DE102011010384 A1, 2012.
  6. Moosburger-Will J. Joining of carbon fiber reinforced polymer laminates by a novel partial cross-linking process, Journal of Applied Polymer Science, 2015, Vol. 132, P. I.27.
  7. Moosburger-Will J. Physical aging of partially crosslinked RTM6 epoxy resin, Journal of Applied Polymer Science, 2014, Vol. 131, P. I.23.
  8. Sistema monitoringa techeniya i otverzhdeniya svyazuyushego DIAMon Plus [The system of monitoring the flow and curing the binder DIAMon Plus]. (In Russ). Available at: http://cct-kai.com/index.php/ru/struktura-tsentra/lab-compositn-konstrucs-ru/transfernoe-formovanie- ru/diamonplus-inasco-ru (accessed 25.05.2015).
  9. Reed W. F., Alb A. M. Monitoring from polymerization reactions: Fundamentals to applications. Wiley, 2013, 488 p.
  10. Senturia S. D., Sheppard N. F. Dielectric analysis of thermoset cure. Advance in polymer science. 1986, Vol. 80, P. 1–47.
  11. Kruckenberg T., Paton R. Resin Transfer Moulding for Aerospace Structures. Springer, 1999, 522 p.
  12. Kendall K. N., Rudd C. D., Owen M. J. Characterization of the resin transfer moulding process. Composites Manufacturing. 1992, Vol. 3, P. 235–249.
  13. Vlasov A. Yu. [et al.]. [Determination of the range of changes in key parameters, ensuring stability production process of complex shapes of polymer composites by method RTM]. Vestnik SibGAU, 2014, Vol. 4(56), P. 202–208 (In Russ.).
  14. Litvinov V. B. [Epoxy binder curing kinetics and microstructure of the polymer matrix in CFRP]. Materialovedenie, 2011, Vol. 7, P. 15–20 (In Russ.).
  15. Vlasov A. Yu. [et al.]. [Development of the precision satellite reflectors of polymeric composite materials: adaptive control system of manufacturing process]. Vestnik SibGAU, 2013, Vol. 3 (49), P. 166–168 (In Russ.).
  16. Elandou J. P., Gerard J. F., Pascault J. P. Microdielectric study of epoxy-amine systems: Gelation and relationships between conductivity and kinetics. Die Angewandte Makromolekulare Chemie, 1999, Vol. 263, P. 57–70.

Vlasov Anton Yur’evich – Cand. Sc., Docent, Reshetnev Siberian State Aerospace University. E-mail: vlasov.anton@gmail.com.

Pasechnik Kirill Arnol'dovich – engineer, Reshetnev Siberian State Aerospace University. E-mail: kir.nik@mail.ru.

Martynov Vasiliy Alexandrovich – engineer, Reshetnev Siberian State Aerospace University. E-mail: martynov.vasiliy@gmail.ru.