UDK 621.454.2 Doi: 10.31772/2587-6066-2020-21-3-364-376
HEAT TRANSFER IN THE CENTRIFUGAL FORCE FIELD FOR GAS TURBINES ELEMENTS
A. A. Zuev, A. A. Arngold, E. V. Khodenkova
Reshetnev Siberian State University of Science and Technology; 31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037, Russian Federation; JSC “Krasnoyarsk machine-building plant”; 29, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660123, Russian Federation
The study of heat transfer from combustion products (CP) to the impeller and the casing of gas turbines of liquid rocket engines (LRE) is an urgent task. The solution of the flow problem, taking into account heat transfer, in rotational flows, in the flowing parts of the turbopump units (TPU) of the rocket engine, is carried out by the following methods: numerical methods; analytical approach, when solving the equations of dynamic and temperature boundary layers; as well as using empirical dependencies. The temperature parameter of the gaseous combustion products and, as a consequence, the heat exchange between the combustion products and the structural elements of the flow part, significantly affects the working and energy characteristics of the TPU LRE. When designing gas turbines of LRE, it is necessary to take into account the presence of heat exchange processes, the working fluid temperature distribution and the structural element temperatures in the cavities of the TPU LRE (since energy losses and viscosity depend on the temperatures of the working fluid, and also determine the flow parameters). The temperature distribution in the structural elements determines the performance and reliability of the unit. In the case of the use of cryogenic fuel components in the TPU LRE units the heating of the component leads to the implementation of cavitation modes and a drop in operating and energy characteristics. On the other hand, a lowered temperature of the working fluid leads to an increased viscosity of the components and, as a consequence, a decrease in the efficiency of the unit (especially when using gel-like components). When studying heat transfer in the field of centrifugal forces for elements of rocket engine gas turbines it is necessary to obtain a joint solution of the equations of dynamic and temperature boundary layers in the boundary conditions of the flow parts. This article offers a model of the distribution of dynamic and temperature boundary layers taking into account the convective component (for the case of a gaseous working fluid, i. e. Pr < 1), which is necessary for the analytical solution and determination of the heat transfer coefficient in the boundary conditions of the flow cavities of the LRE turbine. The energy equation has been analytically obtained for the boundary conditions of the temperature boundary layer, which allows integration over the surface of any shape, which is necessary in determining the thickness of the energy loss. Taking into account the integral relation, the heat transfer law of the turbulent boundary layer for the rotation cavities is written. The equations for determining the heat transfer coefficient in the form of the Stanton criterion for rectilinear uniform and rotational flows for cases of turbulent flow regimes were obtained analytically. The obtained equations for heat transfer coefficients are in good agreement with experimental data and dependences of other authors.
Keywords: heat transfer coefficient, temperature boundary layer, turbopump unit, power parameters, turbine.
References

1. Voiskunski J. I., Faddeev, Y. I., Fedyaevsky K. K.
Gidromekhanika [Hydromechanics]. Leningrad, Sudostroenie
Publ., 1982, 456 p.
2. Stoll J., Straub J. Film cooling and heat transfer in
nozzles. J. Turbomach. 1988, No. 110, P. 57–64.
3. Dellimore K. Modeling and Simulation of Mixing
Layer Flows for Rocket Engine Film Cooling (Ph. D. thesis).
University of Maryland at College Park, 2010.
4. Jansson L. S., Davidson L., Olsson E. Calculation
of steady and unsteady flows in a film-cooling arrangement
using a two-layer algebraic stress model. Numer.
Heat. Transf. 1994, Part A 25, P. 237–258.
5. Cruz C. Experimental and Numerical Characterization
of Turbulent Slot Film Cooling (Ph.D. thesis).
University of Maryland at College Park, 2008.
6. Cruz C., Marshall A. Surface and gas measurements
along a film cooled wall. J. Thermophys. Heat.
Transf. 2007, No. 21, P. 181–189.
7. Betti B., Martelli E. Heat flux evaluation in oxygen/
methane thrust chambers by RANS approach.
Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint
Propulsion Conference, AIAA. 2010, P. 2010–6721.
8. Ilinkov A. V., Gabdrakhmanov R. R., Takmovtsev
V. V., Shchukin A. V. [Effect of centrifugal mass forces
on heat transfer during air flow around a concave surface
with transverse protrusions]. Vestnik Moskovskogo aviatsionnogo
institute. 2018, Vol. 25, No. 1, P. 39–48
(In Russ.).
9. Gorelov Yu. G., Strokach E. A. [Analysis of regularities
of calculation of the heat transfer coefficient from
gas at the inlet edges of the nozzle blades of high-pressure
turbines]. Vestnik Moskovskogo aviatsionnogo institute.
2016, Vol. 23, No 1, P. 80–85 (In Russ.).
10. Shcherbakov M. A., Vorobyev D. A., Maslakov
S. A., Ravikovich Yu. A. [Determination of the heat
transfer coefficient on the turbine blade at off-design operating
conditions]. Vestnik Moskovskogo aviatsionnogo
institute. 2013, Vol. 20, No 3, P. 95–103 (In Russ.).
11. Dreytser G. A., Isayev S. A., Lobanov I. E. [Calculation
of convective heat transfer in a pipe with periodic
projections]. Vestnik Moskovskogo aviatsionnogo institute.
2004, Vol. 11, No. 2, P. 28–35 (In Russ.).
12. Knuth E. L. The mechanism of film cooling,
(Ph.D. thesis). California Institute of Technology. 1954.
13. Rannie W. D. Heat transfer in turbulent shear
flow. J. Aeronaut. Sci. 1956, No. 23, P. 485–489.
14. Turcotte D. L. A sublayer theory for fluid injection
into the incompressible turbulent boundary layer.
J. Aeronaut. Sci. 1960, No. 27, P. 675–678.
15. Stechman R. C., Oberstone J., Howell J. C. Design
criteria for film cooling for small liquid-propellant
rocket engines. J. Spacecr. Rocket. 1969, No. 6,
P. 97–102.
16. Bartz D. R. A simple equation for rapid estimation
of rocket nozzle convective heat transfer coefficients,
Jet. Propuls. ARS J. 1957, No. 27, P. 49–51.
17. Shine S. R., Kumar S. S., Suresh B. N. A new
generalised model for liquid film cooling in rocket combustion
chambers. Int. J. Heat. Mass Transf. 2012,
No. 55, P. 5065–5075.
18. Elhefny A., Liang G. Stress and deformation of
rocket gas turbine disc under different loads using finite
element modelling. Propulsion and Power Research.
2013, Vol. 2, Iss. 1, P. 38–49.
19. Grigoryev V. A., Zagrebelnyy A. O., Kuznetsov
S. P. [On the estimation of the mass of the power plant in
the problem of optimization of the working process parameters
of the aircraft turboprop engine]. Vestnik Moskovskogo
aviatsionnogo institute. 2015. Vol. 22, No 3.
P. 103–106 (In Russ.).
20. Kishkin A. A., Chernenko D. V., Chernenko E. V.
[The equation of impulses of a three-dimensional boundary
layer]. Izv. vuzov. Tekhnicheskiye nauki. 2007, No. 4,
P. 35–41 (In Russ.).
21. Romanenko P. N. Teplomassoobmen i treniye pri
gradiyentnom techenii zhidkostey [Heat and mass transfer
and friction at gradient flow of liquids]. Moscow, Energy
Publ., 1971, 568 p.
22. Shlikhting G. Teoriya pogranichnogo sloya [The
theory of the boundary layer]. Moscow, Nauka Publ.,
1974, 712 p.
23. Shine S. R., Shri S. Nidhi. Review on film cooling
of liquid rocket engines. Propulsion and Power Research.
2018, No. 7, Iss. 1, P. 1–18.
24. Keys V. M. Konvektivnyy teplo- i massoobmen
[Convective heat and mass transfer]. Moscow, Energy
Publ., 1972, 448 p.
25. Kishkin A. A., Zuev A. A., Leonov V. P. [Local
heat transfer in the boundary conditions of turbomachines].
Izv. vuzov. Mashinostroyeniye. 2015, No (658),
P. 3–10 (In Russ.).
26. Tolstopyatov M. I., Zuev A. A., Kishkin A. A.,
Zhuikov D. A., Nazarov V. P. [Straight-line uniform flow
of gases with heat transfer in power plants of aircraft].
Vestnik SibGAU. 2012, No. 4(44), P. 134–139 (In Russ.).
27. Kishkin A. A., Zhuykov D. A., Tolstopyatov M. I.
[Flow with heat transfer in the cavities of rotation of
power plants of space and aircraft]. Vestnik SibGAU.
2011, No. 7(40), P. 63–68 (In Russ.).
28. Kishkin A. A., Zuev A. A., Chernenko E. V.,
Smirnov P. N. [The rotation of the liquid over a fixed
base according to the law of a solid]. Izv. vuzov.
Tekhnicheskiye nauki. 2011, No. 1, P. 126–131 (In Russ.).
29. Chapman D. R. Kester R. H. Measurements of
turbulent skin friction on cylinders in axial flow at subsonic
and supersonic velocities. JAS. 1953, Vol. 20,
P. 441–448.
30. Owen J. M., Rogers R. H. Flow and heat transfer
in rotating disc systems. Rotor-stator systems. Taunton:
Research Studies Press, 1989, 302 p.
31. Shevchuk I. V. Convective Heat and Mass Transfer
in Rotating Disk Systems. Springer, 2009, 235 p.
32. Dorfman L. A. Gidrodinamicheskoye soprotivleniye
i teplootdacha vrashchayushchikhsya tel [Hydrodynamic
resistance and heat transfer of rotating bodies].
Moscow, Fizmatgiz Publ., 1960, 260 p.


Zuev Alexander Alexandrovich – Ph. D., associate Professor, Department of Aircraft Engines; Reshetnev Siberian
State University of Science and Technologies. E-mail: dla2011@inbox.ru.
Arngold Anna Anatolievna – Department of Special Connectors and Instruments, Krasnoyarsk Machine-Building
Plant. E-mail: arngoldanna@mail.ru.
Khodenkova Elga Vladimirovna – senior teacher, Technical English Department; Reshetnev Siberian State
University of Science and Technologies. E-mail: zamyatinaev@sibsau.ru.


  HEAT TRANSFER IN THE CENTRIFUGAL FORCE FIELD FOR GAS TURBINES ELEMENTS