Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 620.192 Doi: 10.31772/2587-6066-2020-21-2-279-288
AUTOMATED EXPERIMENT SYSTEMS FOR STUDYING THE PROPERTIES OF TRANSPORT POLYMER MATERIALS IN HIGH-FREQUENCY ELECTROTHERMIA
N. G. Filippenko, A. G. Larchenko
Irkutsk State Transport University; 15, Chernyshevsky St., 664074, Irkutsk, Russian Federation
Recent decades have been characterized by increased activity in the use of polymer and composite materials in transport engineering. In this paper, the authors give a generalizing analysis of previously created systems of scientific research and analyze the principles of building automated systems of scientific research (ASSR) that allow solving the problems of determining the parameters of heat exchange, electrophysical parameters and phase transformations in polymer and composite materials when exposed to the HF field. The authors continue the research of the ASSR HF developed by the Irgups team, a number of other scientific schools working in the same direction.therefore, within the framework of the hardware created by these teams, both similar and original developments and solutions are viewed. The analysis of the software parts of the ASSR HF presented by a number of mathematical models and software complexes is given. Thus, the analysis of the structure of the developed systems of scientific research allows us to speak about its dynamic development. The developed and presented flowcharts of automated experiment and automated research systems allow the author to assert that the systems of automated experiment for studying the properties of polymer materials in RF electrothermia created for cer-tain tasks, despite the fact that they were conducted independently and separately, have a single construction methodology. Comparing the results of the research, the author concludes that the construction of a complex system of ASSR HF polar thermoplastic polymers is generally complete
Keywords: automated scientific research systems, high-frequency electrothermics, polymer products, meth-odology for building research systems.
References

Shastin V. I., Kargapoltcev S. K., Gozbenko V. E., Livshits A. V., Filippenko N. G. Results of the complex studies of microstructural, physical and mechanical properties of engineering materials using innovative methods. International Journal of Applied Engineering Research. 2017, Vol. 12, No. 24, P. 15269–15272.

2. Baranov V. N. Primeneniye mikrokontrollerov AVR: skhemy, algoritmy programmy [Application of AVR microcontrollers: circuits, program algorithms]. Moscow, Dodeka Publ., 2004, 288 p.

3. Bezmenov F. V., Fedorova I. G. Vysokochastotnaya svarka plastmass [High frequency welding of plastics]. Moscow, Mashinostroyeniye Publ., 1989, 89 p.

4. Filippenko N. G., Livshits A. V., Mashovich A. Ya., Kargapol'tsev S. K. Blok avtomatizatsii ustroystva vysokochastotnoy termoobrabotki polimernykh materialov [Automation unit for high-frequency heat treat-ment of polymer materials]. Patent RF, No. 118916. 2011.

5. GOST 22372–77. Materialy dielektricheskiye. Metod opredeleniya dielektricheskoy pronitsayemosti i tangensa ugla dielektricheskikh poter' v diapazone chastot
ot 100 do 5·10(6) Gts [State Standard 22372–77. Dielectric materials. The method for determining the dielectric constant and the dielectric loss tangent in the frequency range from 100 to 5 · 10 (6) Hz]. Moscow, Standartinform Publ., 1977. 52 p.

6. Kiseleva T. F. Tekhnologiya sushki [Drying
technology]. Kemerovo, Kemerovskiy tekhnologicheskiy institut pishchevoy promyshlennosti Publ., 2007.

7. Larchenko A. G. Sistema avtomatizirovannogo upravleniya vysokochastotnym diagnostirovaniem pri pro-izvodstve i ekspluatatsii izdelii iz polimernykh materialov. Kand. Diss. [Automated control sys-tem for high-frequency diagnostics in the production and operation of products from polymeric materials. Cand. Diss.]. Irkutsk, 2014. 164 p.

8. Larchenko A. G. [Automated Device for Diagnosing Polymeric Products of Complex Configuration by the Method of High-Frequency Radiation]. Kontrol'. Diagnostika. 2016, No. 2, P. 61–65 (In Russ.).

9. Livshits A. V. Avtomatizirovannoye upravleniye tekhnologicheskimi protsessami vysokochastotnoy elek-trotermii polimerov. Dokt. diss. [Automated process control of high-frequency electrothermal pol-ymers. Doct. diss.]. Irkutsk, 2016. 351 p.

10. Markova T. E. [The current state and development trends of the polymer industry]. Ekonomika i upravleniye. Available at: https://ecsn.ru/files/pdf/201406/ 201406_94.pdf (accessed 15.04.2020).

11. Matsyuk L. N., Vishnevskaya N. V., Kotovshchikova O. A. [The effect of melt flow on the weldability of polymeric materials]. Svarochnoye proizvodstvo. 1975. P. 25–26.

12. Obzor mirovoy polimernoy industrii [Overview
of the global polymer industry]. Available
at: https://polyprofi.ru/blogs/Blog_Poly_and_Pro/obzor-mirovoy-polimernoy-industrii.php (accessed 15.04.2020).

13. Popov S. I. Avtomatizatsiya upravleniya tekhnologicheskimi protsessami vosstanovleniya ekspluatatsion-nykh svoystv polimerov. Kand. diss.  [Automation of control of technological processes of restoration of operational properties of polymers. Cand. Diss.]. Irkutsk, 2013.150 p.

14. [The order of Rosstat dated April 23, 2017 The
industrial production index is calculated by type of activity: "Mining", "Manufacturing"]. Available at: https://www.gks.ru/bgd/free/B04_03/IssWWW.exe/Stg/d04/7.htm (accessed 15.04.2020).

15. Rumynskiy S. N. Avtomatizirovannaya sistema upravleniya protsessom vysokochastotnoy svarki izdeliy iz poliamida. Kand. diss. [Automated control system for the process of high-frequency welding of products made of polyamide. Cand. Diss]. St. Petersburg, 2005. 133 p.

16. Zaytsev K. I. Matsyuk L. N. Svarka polimernykh materialov [Welding of polymeric materials]. Moscow, Mashinostroenie Publ., 1988, 312.

17. Sukhoguzov A. P., Kosyakov A. A [Investigation of partial discharges in electrical isolation]. Vestnik UGTU–UPI. 2003, No. 5 (25), Part 1, P. 363–371 (In Russ.).

18. Skhemy upravleniya v ASUTP [Control schemes in process control systems]. Available at: http://automation-system.ru/main/item/42-sxemy-upravleniya-v-asutp.html (accessed 15.04.2020).

19. Trostyanskaya Ye. B., Komarov G. V., Shishkin V. A. Svarka plastmass [Welding plastics]. Moscow, Mashinostroenie Publ., 1967, 251 p.

20. Trofimov N. V., Markov A. V. [Mathematical model of the optimal mode of high-frequency welding of plastics]. Matematicheskiye metody v tekhnike i tekhnologiyakh (MMTT-21) [Mathematical methods in engineering and technology (MMTT-21)]. Pskov, 2009, P. 71–73.

21. Trofimov N. V. Upravleniye rezhimom vysokochastotnoy svarki izdeliy iz plastmass slozhnoy formy. Kand. diss. [Control of high-frequency welding of plastic products of complex shape. Cand. Diss]. St. Petersburg, 2011. 112 p.

22. Shengeliya R. G. [On the application of the method of three measurements on a meter when measuring ε and tanδ of materials with large losses]. Elektrichestvo. 1966, P. 79–81 (In Russ.).

23. Larchenko A. G. [Evaluation of the quality
of products from polymeric materials for engineering
purposes]. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2019. Vol. 23, No. 3,
P. 463–471 (In Russ.).


Filippenko Nikolay Grigorievich – Cand. Sc., Associate Professor of the Department Automation of Production
Processes; Irkutsk State Transport University. E-mail:Pentagon@mail.ru.
Larchenko Anastasia Gennadyevna – Cand. Sc., Associate Professor of the Department Automation of Production
Processes; Irkutsk State Transport University. E-mail: Larchenkoa@inbox.ru.  


  AUTOMATED EXPERIMENT SYSTEMS FOR STUDYING THE PROPERTIES OF TRANSPORT POLYMER MATERIALS IN HIGH-FREQUENCY ELECTROTHERMIA