621.791.722
Doi: 10.31772/2587-6066-2020-21-2-266-273
FEATURES OF MODELING THE ELECTRON BEAM DISTRIBUTION ENERGY FOR THE ELECTRON-BEAM WELDING PROCESS
S. O. Kurashkin, Yu. N. Seregin, A. V. Murygin, V. E. Petrenko
Reshetnev Siberian State University of Science and Technology;
31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037, Russian Federation
The energy distribution of the electron beam by means of application of various scanning paths, affects for-mation of the weld, which relates to the quality of the welded joints. Experimental studies, conducted by the au-thors of the article showed that scanning the electron beam in the form of a raster shape gives the best quality of welded joints; therefore, the trajectories of a classical raster and a truncated raster are proposed for the elec-tron beam welding process. When conducting research in this direction, the authors discovered the following regularity: with an increase in the scanning amplitude along the junction, the vapour-gas penetration channel transforms into a stable cavity, along the front wall of which the metal melts, and along the side walls it is trans-ferred to the tail of the weld pool.
The discovered effect of the formation of a penetration cavity is to be investigated in electron beam welding of various materials and thicknesses. For this the necessary equipment is to be created, allowing to make scan-ning in the form of various rasters. To improve the quality of the electron beam welding process, trajectories of a classical raster and a truncated raster across the joint are proposed. For these scanning trajectories, analytical expressions and families of calculated characteristics of the electron beam energy density distribution over the heating spot are obtained. Modulation of the electron beam oscillation in the form of a truncated raster across the junction makes it possible to obtain a two-humped distribution of the beam energy on the surface of the part along the heating spot. The obtained characteristics allow a more meaningful approach to optimizing the pro-cess of electron beam welding of various materials.
Keywords: electron-beam welding, modelling, technological parameters, electron beam, optimisation, normal
distribution law.
1. Rykalin N. N., Zuev I. V., Uglov A. A. Osnovy
elektronno-luchevoy obrabotki materialov [Fundamentals of electron beam
processing of materials]. Moscow,
Engineering, Publ., 1978, 239 p.
2. Sobko S. A., Kulikov V. A. Sposob kontrolya
elektronno-luchevoy svarki [The method of control
of electron-beam welding]. Available at: http://www.freepatent.ru/patents/2495737
(accessed 13.05.2020).
3. Shcherbakov A. B., Rodyakina R. V., Novokreschenov V. V., Lastovirya V. N. Sistemy upravleniya elektronno-luchevykh
ustanovok [Technology of material processing. Equipment of electron-beam
complexes]. Moscow,
Yurayt
Publ.,
2018, P. 114–130.
4. Akopianc K. S., Nesterenko V. M. [Electron-beam
welding of steels up to 600 m
thick with longitudinal oscillations of the beam]. Avtomaticheskaya svarka. 2002, No. 9, P. 3–5 (In Russ.).
5. Ohmine M., Hiramoto
S., Jamane J. Fundamental study on the plused electron beam welding // Intern.
Inst. of Welding; Doc. IV-348-83 – S. I. 1983,
13 p.
6. Belenkiy V. Ya. [Scanning of an
electron beam along an x-shaped trajectory as a means of reducing defects in
the root of a weld in EBW]. Avtomaticheskaya
svarka. 1986, No. 9, P. 35–37. (In Russ.).
7. Barishev M. S., Redchic A. A. [Optimization of
welding modes by oscillating electron beam]. Tez. dokladov 4-y Vserocs. soyuz. konferentsii po svarke tsvetnykh
metallov [Abstracts of the 4th. Rus. Union Conf. on welding
of non-ferrous metals]. 1990, 34 p. (In Russ.).
8. Zenker R. Electron
beam surface treatment and multipool welding – state of the art. Proceedings of the EBEAM 2002. International
Conference on High-Power Electron Beam Technology. 2002, P. 12-1–12-5.
9. Shilov G. A., Akopianc K. S., Kasatkin O. O. [Influence of the
frequency and diameter of the circular scan of the electron beam on the
penetration in EBW]. Avtomaticheskaya
svarka. 1983, No. 8, P.
25–28
(In Russ.).
10. Akopianc K. S., Emchenko-Ribko A. V., Neporohin V. Yu., Shilov G. A. [Prevention of
the formation of root defects in EBW with non-penetration of up to 60 mm depth]. Avtomaticheskaya svarka. 1989, No. 4, P.
30–34 (In Russ.).
11. Komiro Y., Punshon C. S., Gooch T. G., Blakaley P. S. Effects of process parameters on centerline
solidification in EB weld. Metal Constr. 1986, No. 2,
P. 104–111.
12. Vasil’ev A. M., Goncharov V. A., Krivkov B. G., Solyankin V. V., Sharonov N. I. [Electronic beam
control device by welding]. Sudostroitel'naya
promyshlennost'. Seriya Svarka. 1988, No. 6, С. 11–12 (In Russ.).
13. Mara
C. l.,
Funk E. R.,
McMaster R. C.,
Pence P. E.
Penetration
mechanism of electron beam Welding and spiking phenomenon. Welding Journal. 1974, Vol. 53, No. 6, С. 246–251.
14. Béraud N., Vignat F., Villeneuve F.,
Dendievel R. New trajectories in Electron Beam Melting manufacturing to reduce
curling effect. Proceedings of the 47th
CIRP Conference on Manufacturing Systems. 2014, P. 738–743.
15. Seregin Yu. N.,
Laptenok V. D., Uspenskiy N. V., Nikitin V. P. [Experimental research on
the optimization of the technology of electron-beam welding of aluminum
alloys]. Tekhnologii i oborudovanie
ELS-2011. 2011.
P.
71–80 (In Russ.).
16. Seregin Yu. N.,
Laptenok V. D., Murygin A. V., Bocharov A. N. Experimental research on electron-beam
welding technology with a scanning electron beam.
21st Int. Sci. Conf. Resetnev Readings-2017. 2019,
Vol. 467, 8 p.
17. Venttsel' Ye. S. Teoriya veroyatnostey [Probability
theory]. Moscow,
Vysshaya shkola Publ., 1999, 576 p.
18. Kurashkin S. O., Laptenok V. D., Murygin A. V., Seregin Yu. N. Analytical
characteristics of the electron beam distribution density over the heated spot
for optimizing the electron-beam welding process. Welding
in Russia 2019: State-of-the-Art and Perspectives. 2019,
Vol. 681,
7p.
19. Kurashkin S. O.,
Seregin Yu. N., Tynchenko V. S.,
Petrenko V. E., Myrugin A. V. [The program for the formation of the scanning
path of the electron beam in the form of a sine wave in electron beam welding].
Certificate of state registration of a
computer program
№ 2020611327. 2020.