UDK 517.958:531.32 Doi: 10.31772/2587-6066-2020-21-1-8-14
SEMI-ANALYTICAL METHOD FOR CALCULATING ELASTIC-HYDRODYNAMIC CONTACT
Ivanov V. A., Erkaev N. V.
Institute of Computational Technologies SB RAS, 6, Akademika Lavrentyeva St., Novosibirsk, 630090, Russian Federation; Institute of Computational Modeling SB RAS, 50/44, Akademgorodok, Krasnoyarsk, 660036, Russian Federation; Siberian Federal University, Polytechnic Institute, 26, Akademika Kirenskogo St., Krasnoyarsk, 660074, Russian Federation E-mail: VinTextrim@yandex.ru
A semi-analytical method for calculating elastic-hydrodynamic contact based on the partial use of Computer Aided Design / Computer Aided Engineering (CAD / CAE) packages and solutions of the integral equation of functional relationship between pressure and deformation have been described. The pressure in the lubricating layer is described by solving the modernized Reynolds equation taking into account the factors such as elastic deformation of surfaces in the contact zone, cavitation effect in the low-pressure region, and variable viscosity of the lubricant layer, which depends on thermodynamic parameters. Based on the stationary solution, a tensor damping coefficient has been obtained, with the help of which calculations of transient non-stationary modes that occur in cases of a sharp change in the external load have been further performed. A comparison of the results of modeling a plain bearing obtained by using the proposed semi-analytical method has been made and the full calculation performed using CAD / CAE programs such as ANSYS and COMSOL Multiphysics. The comparison showed good convergence of all numerical methods. At the same time, the “hybrid” method showed a number of advantages over direct calculations in CAD / CAE packages, such as: faster calculation speed, low requirements for computing resources and accounting for the cavitation effect. The described semi-analytical method allows to create digital twins of bearing units, centrifugal pumps and hydraulic supports used in satellite cooling systems and in rotary mechanisms of ground-based satellite dishes.
Keyword: hybrid modeling, digital twins, elastic-hydrodynamic contact.
References

1. Williams J. A. Engineering tribology. New York, Oxford University Press Inc., 1994, 242 p.
2. Hamrock B. J., Schmid S. R., Jacobson B. O. Fundamentals of fluid film lubrication. New York, Marcel
Dekker, Inc., 2004, 703 p.
3. Bair S. High-Pressure Rheology for quantitative elastohydrodynamics.
Tribology and Interface Engineering Series. Elsevier, 2007, 54 p.
4. Szeri A. Z. Fluid film lubrication. Cambridge, Cambridge University Press, 2011, 273 p.
5. Lugt P. M., Morales-Espejel G. T. A Review of elasto-hydrodynamic lubrication theory.
Tribology
Transactions
. 2011, Vol. 54, P. 470–496.
6. Galakhov M. A., Usov P. P.
Differentsial'nye i integral'nye uravneniya matematicheskoy teorii treniya
[Differential and integral equations of the mathematical theory of friction]. Moscow, Nauka Publ., 1990, 280 p.
7. Borovin G. K., Protopopov A. A. [Calculation of the optimal axial clearance of the semi-open impeller
of the low-flow centrifugal pump of the spacecraft thermal control system].
Preprinty IPM im. M.V. Keldysha.
2013, No. 86, 16 p. (In Russ.).
8. Tikhonov A. N. Arsenin V. Ya.
Metody resheniya nekorrektnykh zadach [Methods for solving incorrect
tasks]. Moscow, Nauka Publ., 1979, 288 p.
9. Ivanov V. A., Erkaev N. V. [Nostedy ocillations of the roller contacting with riding surface with lubrication
layer].
Vestnik SibGAU. 2017, Vol. 18, No. 1, P. 50–57 (In Russ.).
10. Terentev V. F., Erkaev N. V., Dokshanin S. G. 
Tribonadejnost podshipnikovix uzlov v prisutstvii modifi
cirovanix smazochnix kompozicii [Tribo-durability of bearing units in a presence of modified lubricant compositions]. Novosibirsk, Nauka Publ., 2003, 142 p.
11. Ivanov V. A., Erkaev N. V. [Iterative calculation of trubo-contact between a roller and plate].
Vestnik
SibGAU
. 2014, No. 4(56), P. 48–54 (In Russ.).
12. Besportochnyy A. I., Galakhov M. A.
Matematicheskoe modelirovanie v tribotekhnike. [Mathematical modeling in tribology]. Moscow, MFTI Publ., 1991, 88 p.
13. Galin L. A.
Kontaktnye zadachi teorii uprugosti i
vyazkouprugosti
[Contact problems of the theory of elasticity and viscoelasticity]. Moscow, Fizmatlit Publ., 1980,
304 p.
14. Ivanov V. A. [Program complex of pressure calculation in lubricated slide bearing layer].
Siberian Journal
of Science and Technology.
2018. Vol. 19, No. 3, P. 540–549 (In Russ.).
15. Ravindra M., Sandeep S. Analysis of hydrodynamic plain journal bearing. Excerpt from the Proceedings COMSOL Conference in Bangalore. 2013.
  


Ivanov Viktor Andreevich – Cand. Sc., researcher, laboratory of digital twins and big data analysis, Institute
of Computational Technologies SB RAS; assistant of Applied mechanics department, Siberian Federal University,
Polytechnic Institute. E-mail: Vintextrim@yandex.ru.
Erkaev Nikolai Vasilievich – Dr. Sc., professor, principle research scientist, Institute of Computational Modelling
SB RAS; Professor of Applied mechanics department, Siberian Federal University, Polytechnic Institute. E-mail:
nerkaev@gmail.com.
  


  SEMI-ANALYTICAL METHOD FOR CALCULATING ELASTIC-HYDRODYNAMIC CONTACT