UDK (15).002; 620.2(15) Doi: 10.31772/2587-6066-2019-20-3-390-397
FORMATION FEATURES OF THE CENTRAL LAYERS OF THE ALLOY Fe – 3 % Si (110)[hkl] ROLLING TEXTURES
S. V. Mishnev, V. N. Shakhov, S. A. Gotovko, V. A. Padar, I. S. Dementeva
Reshetnev Siberian State University of Science and Technologies, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation; Siberian Federal University, 28, Kirensky St., Krasnoyarsk, 660049, Russian Federation. E-mail: shasla@mail.ru
The fields of solid-state physics, metallurgy, plastic deformation, mathematics and continuum mechanics are engaged in the studies of texturing of metals and alloys and their influence on the operational properties of products. As a rule, the most significant results are expected at the interface between these sciences. The technologies of obtaining textured materials by metal forming processes occupy a special place in the metalworking sphere. This is due to promising directions in technologies for producing semi-finished and final products with improved structure-sensitive properties, by regulating the texturing, taking into account initial crystallographic orientation of the workpiece. The first issue to note is the formation of an ideal, one-component crystallographic texture in anisotropic metallic materials. The second issue is to obtain semi-finished and final products with more specific service properties: crystallographic texture with specific predetermined components. For instance, due to the crystallographic texture, it is possible to increase the resistance of metals and alloys against corrosion and hostile environment. Considering textured materials as composite, we must note that directionally oriented crystallites with crystallographic directions relative to the laboratory direction perform as reinforced elements. The initial texture in the processing plane is especially important. The materials, which possess unique structure-sensitive properties acquired through pressure treatment, are very promising for a widespread use in the sphere of aerospace technology. Obviously, the properties and means of their achievement are diverse and require setting a specific task. Therefore, further research in this sphere is especially promising. The article presents the research findings, considering the effect of initial crystallographic orientation and deformation modes on the rolling texture in the central layer of Fe – 3% Si (110)[hkl] single crystals. Several groups of single crystal samples underwent rolling under laboratory conditions. The groups of samples were classified according to the final deformation rate, the ideal crystallographic orientation of the rolling plane and deflections of the ideal orientation plane direction from the rolling direction. The methodology of the experiment took into account the compression rate value during one rolling. We analyzed the results of rolling, using the radiographic method. The next step was to superimpose the radiographic data on a stereographic projection and to construct straight pole figures. The results of straight pole figures decoding revealed differences in the texture formation from the previously obtained data. The research shows the manifestation of the one-component deformation texture in the central layer.
Keywords: deformation of single crystals, crystallographic texture, standard crystallographic projection, pole figures, deformation texture.
References

1. Nye J. Fizicheskie svoistva kristallov [Physical properties of crystals]. Moscow, Mir Publ., 1967, 385 p.
(In Russ.).
2. Sirotin Y. I., Shaskol'skaya M. P. Osnovy kristallofiziki [Basics of crystal physics]. Moscow, Nauka Publ.,
1979, 639 p. (In Russ.).
3. Talashkevich I. P., Mishnev S. V., Slavov V. I. [Symmetry textures in parallel rolling]. Tez. dokl. III Vsesoyuznoi
konferentsii po teksturam i rekristallizatsii v metallakh i splavakh [Thesis report III All-Union conference
on textures and recrystallization in metals and alloys]. Krasnoyarsk, KrPI, 1980, P. 12 (In Russ.).
4. Talashkevich I. P., Mishnev S. V. [Texture formation during differential rolling of iron]. Tez. dokl. Vsesoyuz.
konf. “Povyshenie dolgovechnosti i nadezhnosti mashin i privodov” [Thesis report All-Union conference
‘Increased durability and reliability of machines and drives’]. Kuibyshev, KPI, 1981, P. 354 (In Russ.).
5. Mishnev S. V., Talashkevich I. P., Durnev V. D. [Differential rolled metal sheet technologies]. Vestnik
KGTU. Mashinostroenie. 1999, P. 66–73 (In Russ.).
6. Durnev V. D., Talashkevich I. P. Simmetriya v tekhnologii [Symmetry in technology]. St. Petersburg,
Politekhnik Publ., 1993, 256 p. (In Russ.).
7. Penelle et Lacombe Les Texturs de Lamlnage. Acta Metallurcica. 1968, Vol. 16, P. 346–351.
8. Shubnikov A. V., Koptsik V. A. Simmetriya v nauke i iskusstve [Symmetry in the science and art]. Moscow,
Nauka Publ., 1972, P. 399 (In Russ.).
9. Koptsik V. A. [Principles of symmetrizationasymmetry of Shubnikov-Curie for the composite physical
systems]. Problemy sovremennoi kristallografii. Sb. pamyati A.V. Shubnikova. Moscow, Nauka Publ., 1975, P.
42–60 (In Russ.).
10. Mishnev S. V. [Determination of the forms of stress tensors based on the Curie principle]. Vestnik
KGTU. Mashinostroenie. 1999, No. 15, P. 184–189 (In Russ.).
11. Volodin P. A., Mishnev S. V. Talashkevich I. P. [Expanding the boundaries of the applicability of the
principle of Hermann-Herman]. Vserossiiskaya nauchnoprakticheskaya
konferentsiya molodykh uchenykh “Innovatsii i aktual'nye problemy tekhniki i tekhnologii”
[All-Russian scientific-practical conference of young scientists "Innovations and Challenges of engineering and
technology"]. Saratov, 26–29 October 2010. 2010, Vol. 2, P. 126–130 (In Russ.).
12. Druzhinin V. V. Magnitnye svoistva elektrotekhnicheskoi stali [Magnetic properties of electrical
steel]. Moscow, Energiya Publ., 1974, 240 p. (In Russ.).
13. Hgun Hu and R. S. Cline Rolling Texture in Aluminium-Iron Single Crystals // Trans of The Metallurgical
Society of AIME., 224, P. 784.
14. Avramov Y. S., Naumann G. [Formation of the recrystallization texture during the rolling of single crystals
of Fe – Si (3%) of a single crystal (110) in different crystallographic directions]. Neorganicheskie materially.
1967, Vol. 3, No. 7, P. 1170–1173 (In Russ.).
15. Avramov Y. S., Molotilov B. V., Naumann G. [The ratio between the textures of deformation and recrystallization
during the rolling of single crystals (110) of transformer steel in different directions]. FMM. 1966,
Vol. 21, No. 5, P. 740–744 (In Russ.).
16. Opinsky A. J., Smoluchowski R. The Crystallographic Aspect on Slip Body-Centered Cubic Single
Crystals, 2. Interprenanion on Experiments // Journal of Applied Physics. 1951, Vol. 22, No. 12, P. 1488–1492.
17. Hu H. Otzhig kremnistogo zheleza. Vozvrat i rekristallizatsiya metallov [Siliceous iron annealing. Return
and recrystallization of metals]. Moscow, Metallurgiya Publ., 1966, P. 273–326 (In Russ.).
18. Savinskaya A. A., Gol'dshtein V. Ya. [Investigation of the heterogeneity of textural formation during rolling
of silicon iron single crystals]. Materialy 3-ei Vsesoyuznoi konferentsii po teksturam i rekristallizatsii v
metallakh i splavakh [Materials of the 3rd All-Union conference on textures and recrystallization in metals and
alloys]. Krasnoyarsk, KrPI, 1982, P. 92–99 (In Russ.).
19. Kazadzhan L. B., Sil'nikova E. F., Dergach V. V. [Asymmetry of deformation textures of siliceous iron
single crystals]. Izvestiya AN SSSR, seriya fizicheskaya. 1979, Vol. 43, No. 7, P. 1385–1387 (In Russ.).
20. Gorelik S. S., Rastorguev L. N., Skakov Y. A. Rentgenograficheskii i elektronno-opticheskii analiz [Xray
and electron-optical analysis]. Moscow, MISIS Publ., 2002, 360 p. (In Russ.).
21. Borodkina M. M., Spektr E. N. Rentgenograficheskii analiz tekstur metallov i splavov
[X-ray analysis of the textures of metals and alloys]. Moscow, Metallurgiya Publ., 1981, 272 p. (In Russ.).
22. Druzhinin V. V. [On the anisotropy of the brittleness of silicon steel sheet]. FMM. 1959, Vol. 7,
No. 2, P. 278–283 (In Russ.).
23. Kudryavtsev I. P. Tekstury v metallakh i splavakh [Textures in metals and alloys]. Moscow, Metallurgiya
Publ., 1966, P. 370 (In Russ.).
24. Vasil'ev V. V., Protasov V. D., Bolotin V. V. Kompozitsionnye materialy: Spravochnik [Composite
materials: handbook]. Moscow, Mashinostroenie Publ., 1990, 520 p. (In Russ.).


Mishnev Sergey Vasil'evich – Cand. Sc., associate professor of the department Mechanical; Siberian Federal
University, Polytechnic Institute. E-mail: smishnev@sfu-kras.ru.

Shakhov Viacheslav Nikolaevich – the senior lecturer of the department Welding of aircraft; Reshetnev Siberian
State University of Science and Technologies. E-mail: shasla@mail.ru.

Gotovko Sergey Alekseevich – Cand. Sc., associate professor of the department Mechanical, Siberian Federal
University, Polytechnic Institute; associate professor of the department Welding of aircraft; Reshetnev Siberian State
University of Science and Technologies. E-mail: gefest_61@mail.ru.

Padar Valerii Aleksandrovich – Cand. Sc., associate professor of the department Mechanical; Siberian Federal
University, Polytechnic Institute. E-mail: va_padar@mail.ru.

Dementeva Irina Sergeevna – the senior lecturer of the department Mechanical; Siberian Federal University,
Polytechnic Institute. E-mail: irene.dementyeva@gmail.com.


  FORMATION FEATURES OF THE CENTRAL LAYERS OF THE ALLOY Fe – 3 % Si (110)[hkl] ROLLING TEXTURES