Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK UDC 620.192 Doi: 10.31772/2587-6066-2019-20-1-106-111
MATHEMATICAL MODELING OF THE TECHNOLOGICAL PROCESS OF IMPROVING THE QUALITY OF POLYMERIC PRODUCTS OF MACHINE-BUILDING PURPOSES. P. 106–111.
Larchenko A. G, Filippenko N. G., Livshits A. V.
Irkutsk State Transport University, 15, Chernyshevsky St., Irkutsk, 664074, Russian Federation. E-mail: Larchenkoa@inbox.ru.
In this scientific work, a method of controlling high-frequency products from polymeric composite materials is considered. The authors of the work present the rationale for choosing a method of high-frequency diagnostics as the most suitable for non-destructive testing of products from polymeric materials of machine-building and rocket-space purposes. In the presented article, the primary task of creating and studying a mathematical model of the effect of highfrequency radiation on a polymer product, including those with a “metallic inclusion” defect, has been stated and solved. In addition, the work presents the calculations of diagnostic parameters using the mathematical model developed during the study. The calculation of the dynamics of heating the product and the temperature distribution during the control process is presented. The results of the calculation of specific power are described, the dependence of the instantaneous power consumption on the warm-up time is found. In the study based on a mathematical model, the Aleo- Diagnost software package was developed and registered, which is directly intended to ensure the functioning of the diagnostic devices and the investigation of the monitoring process. In addition, the developed complex allows solving a number of such practical problems as the calculation of the operating voltage depending on the geometrical parameters of the product and the determination of the value of energy consumed for monitoring the product for a specified period of time. This stage was necessary, as the consumed energy is the main output parameter of the diagnosis. In addition, the value of energy consumed is taken as the basis for the organization of the process of non-destructive testing in the automated mode. The solution of the tasks in this work has significantly reduced the cost of preparation of diagnostic operations, as well as improve the quality of control of products on an industrial scale at the stages of manufacture, operation and during repair work. The article also presents practical results, conclusions.
Keywords: control of high frequency currents, device for products diagnosing, polymer products, automated control system, diagnosing products of complex configuration, mathematical model of the diagnostic process, software, nondestructive testing.
References

1. Larchenko A. G. Sistema avtomatizirovannogo upravleniya vysokochastotnym diagnostirovaniyem pri proizvodstve i ekspluatatsii izdeliy iz polimernykh materialov. Kand. Diss. [Automated control system for highfrequency diagnostics in the production and operation of products from polymeric materials. Cand. Diss.]. Irkutsk, 2014, 164 p.

2. La Mantia F. Vtorichnaya pererabotka plastmass. [Recycling plastics]. St.Petersburg, Profession Publ., 2006, 400 p.

3. Rabek J. Eksperimental'nyye metody v khimii polimerov [Experimental methods in chemistry of polymers], Moscow, Mir Publ., 1983, 480 p.

4. Filippenko N. G. Avtomatizatsiya upravleniya protsessom vysokochastotnoy obrabotki polimernykh materialov. Kand. Diss. [Automation of the process control of high-frequency processing of polymer materials. Cand. Diss.]. Irkutsk, 2012, 160 p.

5. Popov S. I. Avtomatizatsiya upravleniya tekhnologicheskimi protsessami vosstanovleniya ekspluatatsionnykh svoystv polimerov. Kand. Diss. [Automation of Control of Technological Processes for Restoration of Polymer Operational Properties. Cand. Diss.], Irkutsk, 2013, 120 p.

6. Popov S. I., Livshits A. V., Filippenko N. G. [Experimental studies of the possibility of restoring products from polymeric materials]. Transportnaya infrastruktura Sibirskogo regiona: Materialy tret'yey vserossiyskoy nauchno–prakticheskoy konferentsii s mezhdunarodnym uchastiyem [Siberian Transport Infrastructure: Materials of the third all-Russian scientific-practical conference with international participation]. Irkutsk, IrGUPS, 2013, P. 430–437 (In Russ.).

7. Larchenko A. G., Filippenko N. G., Livshits A. V. [Diagnostic device for polyamide separators by highfrequency radiation method]. Covremennyye tekhnologii. Sovremennyy analiz. Modelirovaniye. 2014, No. 4, P. 162–168 (In Russ.).

8. Larchenko A. G., Livshits A. V., Popov S. I., Filippenko N. G. Ustroystvo diagnostiki detaley iz poliamidnykh materialov [Device for diagnostics of parts from polyamide materials]. Patent RF, No. 132209, 2013.

9. Larchenko A. G. [Automated detection of defects in products made of polyamide materials by the method of high-frequency radiation]. Covremennyye tekhnologii. Sovremennyy analiz. Modelirovaniye. 2014, No. 41, P. 160–165 (In Russ.).

10. Filipenko N. G., Larchenko A. G., Livshits A. V. [Innovative method for diagnosing products from polymeric materials]. Sbornik nauchnykh trudov. Transportnaya infrastruktura Sibirskogo regiona. [Proc. Transport infrastructure of the Siberian region]. 2013, No. 2, P. 437–440 (In Russ.).

11. Larchenko A. G., Filippenko N. G., Popov S. I., Livshits A. V. [Investigation of the influence of the dielectric elements of a working capacitor in a highfrequency electrothermal installation on the processing of polymeric materials]. Covremennyye tekhnologii. Sovremennyy analiz. Modelirovaniye. 2013, No. 3, P. 270–275 (In Russ.).

12. Larchenko A. G. [Automated Device for Diagnosing Polymeric Products of Complex Configuration by the Method of High-Frequency Radiation]. Kontrol'. Diagnostika. 2016, No. 2, P. 61–65 (In Russ.).

13. Larchenko A. G. [Automated control system for high-frequency diagnostics of articles made of polymeric materials]. Avtomatizatsiya. Sovremennyye tekhnologii. 2015, No. 8, P. 3–8 (In Russ.).

14. Filipenko N. G Livshits A. V, Mashovich A. Ya. [Automation of the process of high-frequency heating of materials at an industrial unit UZP 2500]. Covremennyye tekhnologii. Sovremennyy analiz. Modelirovaniye. 2011, No. 2 (30), P. 193–198 (In Russ.).

15. Livshits A. V. Mathematical modeling of the processes of the high-frequency heating of thermoplasts and quality improvement of welded polymeric items. JP Journal of Heat and Mass Transfer. Pushpa Publishing House, Allahabad, India, 2017.


Larchenko Anastasia Gennadyevna – Cand. Sc., Associate Professor of the Department “Automation of Production Processes”, Irkutsk State Transport University. E-mail: Larchenkoa@inbox.ru.

Filippenko Nikolay Grigorievich – Cand. Sc., Associate Professor of the Department “Automation of Production Processes”, Irkutsk State Transport University. E-mail: Pentagon@mail.ru.

Livshits Alexander Valerievich – Dr. Sc., Vice-Rector for Research, Irkutsk State Transport University. E-mail: livshic_av@irgups.ru.


  MATHEMATICAL MODELING OF THE TECHNOLOGICAL PROCESS OF IMPROVING THE QUALITY OF POLYMERIC PRODUCTS OF MACHINE-BUILDING PURPOSES. P. 106–111.