Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 621.454.2 Doi: 10.31772/2587-6066-2018-19-3-469-481
INFLUENCE OF FILLING PROCESSES FOR MIXING HEAD OF GAS GENERATORS ON DYNAMICS OF LIQUID ROCKET ENGINE WITHOUT STARTER DEVICE
E. N. Belayev, A. G. Vorobyev*
Moscow Aviation Institute (National research university) Volokolamskoe sh., 4, A-80, Moscow, 125993, Russian Federation *E-mail: formula1_av@mail.ru
One of the most difficult tasks in the development of a liquid rocket engine is to ensure its reliable and stable ignition. During this period of engine operation, in the process of its development, abnormal and emergency situations very often appear. It typically happens due to a large range of the mass flow of components entering the gas generator and combustion chamber. For these moments of entering and the mass flow value, the processes of filling of free volumes and mixing heads of the gas generator and the combustion chamber have a significant effect. The mix ratio of the components coming into them depends on the evolution of the working processes and, in particular, the temperature of the generator gas. Its efficiency depends on the working opportunity of the nozzle apparatus and turbine blades. It is very important, in the process of starting the engine, not to allow large temperature to spike in the gas generator, especially for engines with an oxidative scheme of gas generation, as in an oxidizing environment, the ignition of elements of the gas path is possible at relatively low gas temperatures. The article shows the problem of filling the mixing heads of the gas generator and the effect of this process on the dynamics of the launch of a liquid rocket engine which does not use special starter devices. The analysis of the designs of gas generators and their mixing heads is carried out; the features of the organization of the working process in the volumes of the gas generator are considered. For a theoretical analysis of the problem a nonlinear mathematical model of a liquid rocket engine is used. With its help, the study of the launch of a liquid rocket engine with and without taking into account the injection of gas into the mixing head of the gas generator was made. The injection of gas is one of the methods for metering the mass flow of the fuel component, which essentially enhances the spray of the component entering the combustion zone. When examining the start-up process of a gas generator without injection of gas, various forms of the functions of the outflow of fuel from the mixing head have been studied. It is shown that the shape of the functions of the outflow has a significant effect on the presence and amplitude of the temperature burst in the gas generator. In order for the results of mathematical simulation of the launch of a liquid rocket engine to be adequate for fullscale testing of engines, it is necessary to conduct special experiments to fill the mixing heads on normal-boiling and cryogenic components of the fuel.
Keywords: liquid rocket engine, gas-liquid volumes, combustor chamber, gas generator, mixing head, mathematical modeling of LRE.
References

1. Belyayev E. N., Chvanov V. K., Chervakov V. V. Matematicheskoye modelirovaniye rabochego protsessa zhidkostnykh raketnykh dvigateley [The mathematical modeling of working processes of liquid rocket engines]. Moscow, MAI Publ., 1999, 226 p.

2. Lebedinskiy E. N., Mosolov S. V., Kalmykov G. P. et al. Komp’yuternyye modeli zhidkostnykh raketnykh dvigateley [The computational momels of liquid rocket engines]. Moscow, Mashinostroenie Publ., 2009, 375 p.

3. Bradford J. E., Chararnia A., Germain B. St. REDTOP-2: Rocket Engine Design Tool Featuring Engine Performance, Weight, Cost, and Reliability. 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA-2004-3514, 2004, 17 p.

4. Yang H. S., Park B. H., Yoon W. S. Modular Program for Conceptual Design of Liquid Rocket Engine System, Part I : Essential Components Design. Journal of the Korean Society for Aeronautical & Space Sciences. 2007, Vol. 35, No. 9, P. 805–815. DOI: 10.5139/JKSAS.2007.35.9.816.

5. Adzhyan A. P. [Features of the development of an oxidizing gas generator for a multi-mode single-chamber engine]. Trudy NPO Energomash. 2010, No. 27, P. 200–216 (In Russ.).

6. Adzhyan A. P., Rakhmanin V. F. [The evolution of progress gasgenerator of liquid rocket engine]. Dvigatel’. 2010, Vol. 2 (68), P. 13–15 (In Russ.).

7. Chen H.-Y., Liu H.-J., Chen J.-H. Forced start-up procedure of a staged combustion cycle engine. Journal of Aerospace Power. 2015, Vol. 30, Iss. 12, P. 3010–3016. DOI: 10.13224/j.cnki.jasp.2015.12.026.

8. Zhang X.-P., Ding F.-N. Starting process of oxidizer-rich staged combustion rocket engine. Journal of Propulsion Technology. 2004, Vol. 25, Iss.1, P. 82–85.

9. George P. S., Oscar B. Rocket Propulsion Elements, 8th ed. John Wiley & Sons Inc., 2010, 751 p.

10. Soon-Young Park, YoungJun Kim and Eun- Whan Jeong. Optimization of the Startup Sequence of a Liquid-propellant Rocket Engine. 7th european conference for aeronautics and space sciences (EUCASS). 2017. P. 17. DOI: 10.13009/EUCASS2017-293.

11. RD-120. Available at: http://www.npoenergomash.ru// dejatelnost/engines/rd120/rd120_4.html (accessed: 24.04.2016).

12. Al’bom konstruktsiy ZHRD [The album of design]. Ed. B. I. Katorgin, V. K. Chvanon. Khimki, KB NPO Energomash Publ., 1992, 259 p.

13. ZHRD RD-180. Available at: URL: http://lpre.de/energomash/RD-180/index.htm (accessed: 24.05.2018).

14. Belyayev E. N., Chervakov V. V. Matematicheskoye modelirovaniye ZHRD [The computational modelng of LRE]. Moscow, MAI Publ., 2009, 280 p.

15. Belyayev E. N., Vorob’yev A. G., Gnesin E. M. [Development of nonlinear mathematical model of liquid rocket engine working on stationary mode]. Trudy' MAI. 2014, Vol. 73 (In Russ.). Available at: http://www.mai.ru/science/trudy/published.php?ID=48537 (accessed: 15.03.2018).

16. Belyayev E. N., Chvanov V. K., Chervakov V. V. [Expiration of the two-phase gas-liquid mixture from the mixing head of the gas generator at the launch of the LRE]. Teplofizika vysokikh temperature. 2005, Vol. 43, No. 3, P. 446–451 (In Russ.).

17. Uollis G. Odnomernyye dvukhfaznyye techeniya [One-dimensional two-phases flow]. Moscow, Mir Publ., 1972, 440 p.

18. Katorgin B. I., CHvanov V. K., Belyayev E. N. et al. [The numerical modeling of modern LRE]. Dvigatel’. 2002, Vol. 4, P. 13–15 (In Russ.).

19. Shevyakov A. A., Kalnin V. M., Naumenkova N. V., Dyatlov V. G. Teoriya avtomaticheskogo upravleniya raketnymi dvigatelyami [Theory of automatic control of rocket engine]. Moscow, Mashinostroyeniye Publ., 1978, 288 p.


Belayev Evgenyi Nikolaevich – Cand. Sc., Docent, Department of Rocket engines, Faculty of Aircraft engines, Moscow Aviation Institute (National research university). E-mail: belyaev72@rambler.ru.

Vorobyev Alexey Gennadievich – Cand. Sc., Docent, Department of Rocket engines, Faculty of Aircraft engines, Moscow Aviation Institute (National research university). E-mail: formula1_av@mail.ru.


  INFLUENCE OF FILLING PROCESSES FOR MIXING HEAD OF GAS GENERATORS ON DYNAMICS OF LIQUID ROCKET ENGINE WITHOUT STARTER DEVICE