Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 62-762.4, 62-762.8, 678
EXPERIMENTAL INVESTIGATION OF SEALING RUBBER PROPERTY AT HIGH AND LOW TEMPERATURES
A. А. Аsheichik, V. L. Polonsky
Peter the Great Saint-Petersburg Polytechnic University 29, Polytechnicheskaya str., St.-Petersburg, 195251, Russian Federation
In the nodes of aerospace engineering fixed and movable seals made from rubber are widely used. It is also known that the operation of nodes of rocket and space technology comes in a very broad range of both low and high temperatures. Therefore, the calculations of fixed and movable seals of such nodes depending on the elastic constant temperature and temperature effect on the coefficient of friction of rubber must be considered. Otherwise emergence of leaks through seals is possible at low temperatures, and at high temperatures there can be its destruction. The technique studies flexural modulus of the rubber samples in a wide range of temperatures and the bending deformation. The technique of the coefficient of friction of rubber research in friction against steel and fluorinecontaining coatings at low and high temperatures is given. Friction coefficients were defined at a one-way rotary motion of flat samples at a speed of sliding of 0.2 m/s and pressure upon friction surfaces from 0.8 to 50 MPa and the range of temperatures from –40 to 120 °C. The temperature dependences of the static elasticity module at a bend in the range from –70 to 100 °C for five compositions of butadiene-nitrile rubbers are established as a result of experimental studies. Also results of the temperature test imitating change of contact stress in seal after installation at 20 °C and the subsequent cooling, and also temperature test, when after cooling deformation of a bend is increased, are given. The temperature dependences of friction coefficient rubber on fluorinated coverings of three types and steel in the wide range of negative and positive temperatures are experimentally received.
Keywords: seals, rubber, fluorinated coverings, elasticity module, high and low temperatures, friction coefficient, experimental research.
References

1. Kirillov N. P., Burenin V. V., Polyanskiy V. I., Dragun D. K. [The designs of face seals for torsion shaft of centrifugal pumps of systems of refueling of rockets]. Vestnik MADI. 2012, No. 1, P. 18–12 (In Russ.).

2. Chajkun A. M., Eliseev O. A., Naumov I. S., Venediktova M. A. [Features of the construction of coldresistant rubber formulations]. Aviatsionnye materialy i tekhnologii. 2013, No. 3, P. 53–55 (In Russ.).

3. Chajkun A. M., Eliseev O. A., Naumov I. S., Venediktova M. A. [Features of cold-resistant rubbers based on various rubbers]. Aviatsionnye materialy i tekhnologii. 2013, No. 3, P. 4–11 (In Russ.).

4. Bartenev G. M. Struktura I relaksatsionnye svoistva elastomerov. [Structure and relax properties of elastomers]. Moscow, Chemistry Publ., 1979, 287 p.

5. Morozov A. V., Murav’eva T. I., Petrova N. N., Portnjagina V. V., Amosova V. N., Zagorskij D. L. [Investigation of tribological and adhesive properties of cold-resistant rubber]. Kauchuk i rezina. 2015, No. 6, P. 22–27 (In Russ.).

6. Govorova O. A., Vishnickij A. S., Chubarova G. V., Morozov Ju. L. [Development of weatherproof rubber with improved low-temperature and adhesion properties]. Kauchuk i rezina. 1999, No. 2, P. 18–20 (In Russ.).

7. Shilov I. B., Fomin S. V., Durnev E. A. Hlebov G. A., Kiroski D. [Study the effects of low temperatures on the rubber]. Kauchuk i rezina. 2014, No. 5, P. 40–41 (In Russ.).

8. Golubev A. I., Kondakov L. A. Uplotneniya i uplotnitel’naya tekhnika: Spravochnik. [Seal and seal equipment: Handbook]. Moscow, Mechanical engineering Publ., 1986, 464 p.

9. Asheichik A. A., Polonskii V. L. [Influence of contact stress distribution for leakage through mechanical seal]. Vestnik SibGAU, 2015, T. 16, No. 3, P. 705–713 (In Russ.).

10. Asheichik A. A. Osnovy triboniki. [Base of tribonics]. St.-Petersburg, St.-Petersburg polytechnical university Publ., 1995, 116 p. (In Russ.).

11. Asheichik A. A., Polonskii V. L. [Study of wear resistance and load capacity for rubber pulleys lifting equipment]. Vestnik SibGAU. 2016, T. 17, No. 1, P. 186–193 (In Russ.).

12. Chulkin S. G., Asheichik A. A., Selin S. N. [Use of composite materials in subassembly of a friction of the oil equipment]. Voprosy materialovedeniya, 2012, No. 4, P. 240–244 (In Russ.).

13. Asheichik A. A., Chuvakova M. K. [Research of the dynamic module and the module of an internal friction of elastomers]. Nedelya nauki SPbPU [Science week of SPbPU]. St.-Petersburg, St.-Petersburg polytechnical university Publ., 2015, P. 70–73 (In Russ.).

14. Dzh. S. Dik Tekhnologija reziny: Retsepturostroenie i ispytaniya [Rubber Technology: Compounding and testing]. St.-Petersburg, Nauchnye osnovy i tekhnologii Publ., 2010, 620 p. (In Russ.).

15. Asheichik A. A., Polonskii V. L. Raschet detalej mashin metodom konechnykh ehlementov. [The calculation of machine parts using finite element method]. St.-Petersburg, St.-Petersburg polytechnical university Publ., 2016, 243 p. (In Russ.).


Asheichik Anatoly Anatolyevich – Cand. Sc., docent, Peter the Great Saint-Petersburg Polytechnic University.

E-mail: aseichik52@mail.ru.

Polonsky Vladimir L’vovich – Cand. Sc., docent, Peter the Great Saint-Petersburg Polytechnic University. E-mail:

Vladidir.polonsky@gmail.com.