UDK 629.7.064.54
STUDY OF UNIFIED POWER UNIT BASED ON COMBINED VOLTAGE CONVERTER
V. I. Apasov
JSC “Scientific and Industrial centre “Polyus” 56v, Kirov Av., Tomsk, 634041, Russian Federation
Nowadays, there is a stable tendency to reduce weight and size of a spacecraft and, as a result, power supply systems, which are the main service systems. That is why current developments and applications in power systems of power modules with high-performance (weight and size, power, etc.) are essential. This paper discusses the construction of a modular spacecraft power system that provides stable output parameters at the time of its operation both in stationary and in emergency modes. Particular attention is paid to the study of nonlinear dynamic characteristics of the combined voltage converter on the basis of which such a unit can be configured. The bottom line of this study is reduced to find the permissible range of parameters of circuit components, providing a stable single-cycle mode of operation of the device, as well as boundary points of bifurcation, which are points of transition from the single-cycle to high cycle regimes. Thus obtained verifiable mathematical model of the combined converter, based on the switching-discontinuous functions and takes into account the non-linear parameters such as capacitance of input and output filters, as well as the inductance of the storage inductor. The results of a mathematical simulation and experimental study of the combined converter, in particular the bifurcation diagrams of output parameters, dependence of ripples on the load current and gain feedback loop, the output voltage waveform are given. The calculations are checked on a model of such a device, recommendations for practical application of the combined converter in real power system.
Keywords: mathematical modeling, the combined converter, nonlinear dynamics, bifurcation analysis, switching points.
References

1. Souctin B. P. et al. Systemy elektropitaniya kosmicheskikh apparatov [Systems of power supplies of space vehicles]. Novosibirsk, VO “Nauka”, Sib. izd. firma Publ., 1994, 318 p.

2. Electrical power conditioning unit and system. Available at: http:// www.esa.int/Our_Activities/Space_Engineering_Technology/Electrical_power_conditioning_unit_and_system (accessed 15.10.2016).

3. Shamsi P., Fahimi B. Design and development of very high frequency resonant DC-DC boost converters’. IEEE Trans. Power Electron. 2012, Vol. 27, No. 8, P. 3725–3373.

4. Lee I.-O., Cho S.-Y., Moon G.-W. Interleaved buck converter having low switching losses and improved stepdown conversion ratio. IEEE Trans. Power Electron. 2012, Vol. 27, No. 8, P. 3664–3675.

5. Pan C.-T., Chuang C.-F., Chu C.-C. A novel transformerless interleaved high step-down conversion ratio DC-DC converter with low switch voltage stress. IEEE Trans. Power Electron. 2014, Vol. 61, No. 10, P. 5290–5300.

6. Meleshin V. I. Tranzistornaya preobrazovatelnaya tekhnika [The transistor converting techniques]. Moscow, Tekhnosfera Publ., 2006, 632 p.

7. Zinovyev G. S. Osnovy silovoy electroniki: uchebnoe posobie [Bases of power electronics: the manual]. Novosibirsk, NGTU Publ., 2003, 664 p.

8. Moin V. S. Stabilizirovanye tranzistornye preobrazovateli [The stabilized transistor converters]. Moscow, Energoatomizdat Publ., 1986, 376 p.

9. Borodin K. V., Mihalchenko G. Y., Mihalchenko S. G., Obrusnik V. P. [Estimation of nonlinear dynamic properties of semi-conductor converters with energy dispensing on factors of pulsations of a current and voltage]. Nauchnyy vestnik NGTU. 2012, Vol. 47, No. 2, P. 79–90 (In Russ.).

10. Mihalchenko S. G. [Functioning of momentum and modulation converters in multistability zones]. Sbornik TUSUR. 2012, Vol. 25, No. 1, P. 259–268 (In Russ.).

11. Kobzev A. V., Mihalchenko G. Y., Andriyanov A. I., Mihalchenko S. G. Nelineynaya dinamika poluprovodnikovykh preobrazovateley [Nonlinear dynamics of semiconductor converters]. Tomsk, Tom. gos. un-t sistem upravleniya i radioelektroniki Publ., 2007, 224 p.

12. Mihalchenko S. G. Avtomatizatsiya analiza i sintez impulsnykh preobrazovateley energii s dvukhpolyarnoy reversivnoy modulatsiey. Dis. k-ta tekhn. nauk. [Automation of the analysis and synthesis of pulse converters of energy with two-polar reversive modulation. Cand. Tech. Sci. diss.]. Bryansk, 2001, 200 p.

13. Baushev V. S., Gusubaliev G. T. [About not determined modes of functioning of a voltage stabilizer with pulse-width regulation]. Electrichestvo. 1992, Vol. 8, P. 59–68 (In Russ.).

14. Apasov V. I., Mihalchenko S. G., Kotsubinsky V. P. [Mathematical modeling of the combined converter of pressure with stabilization of output voltage]. Sbornik TUSUR. 2013, Vol. 30, No. 4, P. 96–102 (In Russ.).

15. Apasov V. I., Mikhalchenko S. G., Tanovitckiy Y. N. [Analytical method for determining the switching time of the combined converter with output voltage, providing single-cycle mode]. Sbornik TUSUR. 2015, Vol. 36, No. 2, P. 157–164 (In Russ.).

16. Apasov V. I., Mikhalchenko S. G. [Bifurcation analysis of the combined converter at change of capacity of the output filter]. Materialy XVIII Mezdunar. nauch. konf. “Reshetnevskie chteniya” [Proceed. of XVIII Intern. Scientific. Conf “Reshetnev readings”]. Krasnoyarsk, 2014, P. 15–17 (In Russ.).

17. Apasov V. I. [Study of the combined converter with stabilization input voltage]. Materialy XIX Mezdunar. nauch. konf. “Reshetnevskie chteniya” [Proceed. of XIX Intern. Scientific. Conf “Reshetnev readings”]. Krasnoyarsk, 2015, P. 268–269 (In Russ.).


Apasov Vladimir Ivanovich – postgraduate student, Department of Industrial electronics, Tomsk State University

of Control Systems and Radio Electronics; engineer-designer of JSC “Scientific and Industrial Centre “Polyus”’. Email:

vovaap@mail.ru.