Научная электронная библиотека ULRICH'S Periodicals Directory

Сибирский государственный университет
науки и технологий имени академика М.Ф. Решетнева

Сибирский аэрокосмический журнал
ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)

Сведения об образовательной организации

UDK 620.197
INFLUENCE OF TECHNOLOGICAL PROCESSES MDO ON POROUS AND CORROSION RESISTANCE OF THE ALLOY SYSTEMS AL–MG–SC
T. V. Trushkina, A. E. Miheev, N. A. Sidenko, D. V. Ravodina, A. V. Girn
Reshetnev Siberian State Aerospace University 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation
One of the most important problems in the industry by using metals and alloys gate groups, which include aluminum alloys, is to increase the physical and mechanical properties, corrosion resistance of structures, components and assemblies made therefrom. Aluminium alloys, including Alloy 01570 have high specific physical and mechanical properties, but in solution or vapor salts have low corrosion resistance. To improve the corrosion resistance of the various protection methods are used, for example by forming a coating on the working surfaces. For the application of protective coatings on aluminum alloy 01570 a method of micro-arc oxidation (MAO) is proposed. The morphology operation research, payment of porosity and corrosion resistance MDO coatings were carried out. Aluminum alloy is characterized by pitting, turning from time to intergranular. In order to avoid penetration of the active corrosion-protection-through pores MAO coating to the surface of the aluminum alloy, it is necessary to obtain coatings with minimal porosity of the oxide layer. It is found that with increasing ratio of the anodic and cathodic current of from 0.8 to 1.2, a decrease of the total porosity. To determine the corrosion resistance of the coating formed, accelerated laboratory tests were carried out according to GOST 9.308–85 (Method 9). The process of corrosion failure is artificially accelerated, due to alternating samples immersion in corrosive media and then dried at room temperature. Quantitative analysis using a gravimetric method for determining the corrosion rate in simulated marine environment showed that the loss of weight is negligible and the estimated depth index coatings obtained by oxidation on the alloy microarc 01570 are completely resistant group.
Keywords: aluminum and its alloys, 01570, porosity, corrosion resistance, functional coatings, morphology, microarc oxidation.
References

1. Belevantsev V. I., Markov G. A., Terleeva O. P., Shulepko E. K. [Model of transition anodizing in microarc regime]. Izv. SO AN SSSR. Ser. khim. Nauk. 1989, Vol. 6, P. 73–81 (In Russ.).

2. Atroshchenko E. S., Kazantsev I. A., Rozen A. E., Golovanova N. V. [The Scope and properties of coatings obtained by microarc oxidation]. Fizika i khimiya obrabotki materialov. 1996, No. 3, P. 8–11 (In Russ.).

3. Vyacheslavov P. M., Shmeleva N. M. Metody ispytaniy elektroliticheskikh pokrytiy [Test methods of electroplating]. Leningrad, Mashinostroenie Publ., 1977, 210 p.

4. Fedorov V. A. Modifitsirovanie mikrodugovym oksidirovaniem poverkhnostnogo sloya detaley [Modification of micro-arc oxidation of the surface layer]. Moscow, Energiya Publ., 1992, 190 p.

5. Bulychev S. I., Fedorov V. A., Danilevskiy V. P. [Kinetics of the formation of the coating during micro-arc oxidation]. Fizika i khimiya obrabotki materialov, 1993, No. 6, P. 53–59 (In Russ.).

6. Markov G. A., Slonova A. I., Terleeva O. P. [Chemical composition, structure and morphology of microplasma coatings]. Zashchita metallov, 1997, Vol. 33, No. 3, P. 289–294 (In Russ.).

7. Mikheev A. E., Terekhin N. A., Statsura V. V., Golenkova A. A., Ivasev S. S., Girn A. V. [Technological capabilities of micro-arc oxidation of aluminum alloys]. Vestnik mashinostroeniya, 2003, No. 2, P. 56–63 (In Russ.).

8. Tikhonenko V. V., Shkil’ko A. M. [Diagnosis outer layer of the coatings obtained by microarc oxidation on aluminum alloys]. Vestnik NTU “KhPI”. 2010, No. 47, P. 119–125 (In Russ.).

9. Beletskiy V. M., Krivov G. A. [Aluminum alloys (composition, properties, technology, application)]. Kiev, KOMINTEKh Publ., 2005, 365 p.

10. Suminov I. V., Epel’fel’d A. V., Lyudin V. B. Mikrodugovoe oksidirovanie: teoriya, tekhnologiya, oborudovanie [Microarc oxidation: theory, technology equipment]. Moscow, Ekspo Publ., 2005, 368 p.

11. Zemskova E. P. Tekhnologicheskoe obespechenie korrozionnoy stoykosti detaley iz alyuminievykh splavov formirovaniem tonkikh MDO-pokrytiy. Avtoreferat dis. Kand. tekhn. Nauk [Technology ensuring corrosion resistance of aluminum alloys by formation of thin MDOcoatings. Cand. Diss.]. Moscow, 2009, 20 p.

12. Mikheev A. E., Trushkina T. V., Girn A. V., Ravodina D. V. [Chemical processes for micro-arc oxidation]. Vestnik SibGAU. 2013, Vol. 2 (48), P. 212–216 (In Russ.).

13. Trushkina T. V., Mikheev A. E., Girn A. V., Alyakretskiy R. V., Ravodina D. V. [The morphology and porosity of the surface of oxide coatings]. Vestnik SibGAU. 2014, Vol. 2 (54), P. 144–148 (In Russ.).

14. Trushkina T. V. Tekhnologiya formirovaniya vysokoprochnykh korrozionnostoykikh pokrytiy na alyuminievykh splavakh mikrodugovym oksidirovaniem. Avtoreferat dis. Kand. tekhn. Nauk [Forming technology of high strength corrosion resistant coatings on aluminum alloys by micro-arc oxidation. Cand. Diss.]. Krasnoyarsk, 2015, 123 p.

15. Trushkina T. V., Mikheev A. E., Ravodina D. V., Girn A. V. [Development of the functional diagram of the influence of the main factors of micro-arc oxidation process on coatings]. Vestnik SibGAU. 2015, Vol. 16, No. 2, P. 464–469 (In Russ.).

16. GOST R 5272–68. Zashchita ot korrozii. Chast’ 4. Metody naturnykh ispytaniy [State Standart R 5272-68. Corrosion protection. Part 4: Methods of field tests]. Moscow, Standartinform Publ., 1999, 10 p.


Trushkina Tatiana Vladimirovna – Cand. Sc., senior teacher, Department of Flying vehicles, Reshetnev Siberian

State Aerospace University. E-mail: Tatyana.si@mail.ru.

Miheev Anatolii Egorovich – Dr. Sc., professor, head of Department of Flying vehicles, Reshetnev Siberian State

Aerospace University. E-mail: michla@mail.ru.

Sidenko Natalia Alexandrovna – Master’s degree student, Reshetnev Siberian State Aerospace University.

Ravodina Daria Vladimirovna – Master’s degree student, Reshetnev Siberian State Aerospace University. E-mail:

Dashaorlova12@yandex.ru.

Girn Aleksei Vasilyevich – Cand. Sc., docent, docent of Department of Flying vehicles, Reshetnev Siberian State

Aerospace University. E-mail: girn007@gmail.com.